FBA04VA450KF-00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ferrite Beads and Chips

A ferrite bead is an electronic component used to suppress high frequency electronic noise in electronic circuits. It is also known as an RF filter, an EMI filter or an RFI filter. In particular, this type of ferrite is used to protect circuits from electromagnetic interference (EMI) and other high-frequency disturbances. The ferrite bead has an inductive coil wound inside the ferrite core. The inductive coils are made out of conductive wires that are wound around the core. The core and the windings together act as a low-pass filter and reject the high-frequency noise. The ferrite bead acts as a shield that blocks out the high-frequency noise from entering the circuit, minimizing the effect of the disturbance.

FBA04VA450KF-00 is a chip based ferrite bead designed for use in EMI suppression. It is designed for use in Printed Circuit Board (PCB) and Peripheral Component Interconnect (PCI) applications. The ferrite bead is made from a special type of ceramic material containing iron that is designed to effectively attenuate high frequency noise. The ferrite bead chip contains an inductor with an inductance of 4henrie at 10kHz and an attenuation of up to 30dB at 10MHz. It is designed for both commercial and industrial applications.

The FBA04VA450KF-00 ferrite bead chip works on the principle of inductive reactance. When a current flows through the ferrite bead, an induction occurs and the current is impeded. This is because the ferrite material has a high resistive impedance, which opposes the current flow. As the frequency of this current increases, the inductive reactance also increases. As a result, high-frequency noise is effectively suppressed as it passes through the ferrite bead.

The FBA04VA450KF-00 ferrite bead chip is mainly used in application such as mobile phone and computer radio interfaces, audio equipment, and telecommunication and networking equipment. It is also used in automotive designs, consumer electronics, and various other industrial applications. It is easy to use and can be employed in high-frequency applications as it offers excellent signal quality and noise suppression.

The FBA04VA450KF-00 ferrite bead chip is a reliable component with excellent electrical characteristics. It provides excellent EMI rejection and does not alter the signal integrity. Its uniform characteristics provide excellent thermal dissipation and stability, making it an ideal choice for EMI/RFI suppression in a variety of applications.

The specific data is subject to PDF, and the above content is for reference