FCR-50JR-52-1K5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Uncertainty, variability, and current trends play a major role in the application of Through Hole Resistors. This article will discuss the application field and working principle of FCR-50JR-52-1K5, with Respect to Through Hole Resistors.

Overview

FCR-50JR-52-1K5, manufactured by Zicon, is a Through Hole Resistor with high reliability. It is a 5 watt, 50 ohm, single-turn wire-wound potentiometers. It has a 40 mm threaded shaft and is ideal for use in high power switching applications. The potentiometer has a linear response of 0.5% and a temperature coefficient of 0353ppm/C. The total resistance tolerance is +-5%. The potentiometer is RoHS and UL approved and can handle high voltage and high current. It also features a lug-type connector and an adjustable pulse width.

Working Principle

FCR-50JR-52-1K5 works on a voltage divider principle, where two or more resistors are connected in series. When a voltage is applied across the series, each resistor distributes the voltage along the chain in proportion with its resistance value. The voltage at each resistor is determined by the resistance of the remaining chains, thus creating a voltage divider. The current flowing through each resistor is inversely proportional to its resistance value. In the case of FCR-50JR-52-1K5, the adjustable pulse width can be adjusted by adjusting the voltage divider in order to set the desired pulse width.

Application Field

FCR-50JR-52-1K5 is suitable for use in high-power switching applications due to its ability to handle high voltage and high current. It is also suitable for applications requiring low electrical noise, such as in radio communication circuits. The potentiometer is also suitable for applications that require adjustable pulse width, such as in motor control applications. Additionally, the Through Hole Resistor is suitable for applications that require high reliability. In such cases, it is important that the Through Hole Resistor is capable of dissipating the heat generated by the high current while maintaining good insulation.

Conclusion

In conclusion, FCR-50JR-52-1K5 is an excellent choice for Through Hole Resistors. It features high reliability and is capable of handling high voltage and high current. It also has adjustable pulse width which is ideal for motor control applications. Lastly, the Resistor is RoHS and UL approved meaning it meets all safety requirements. For these reasons, FCR-50JR-52-1K5 is well suited for use in high-power switching and radio communication circuits.

The specific data is subject to PDF, and the above content is for reference