| Allicdata Part #: | FCR-50JT-52-200K-ND |
| Manufacturer Part#: |
FCR-50JT-52-200K |
| Price: | $ 0.01 |
| Product Category: | Resistors |
| Manufacturer: | Yageo |
| Short Description: | RES 1/2W 5% AXIAL |
| More Detail: | 200 kOhms ±5% 0.5W, 1/2W Through Hole Resistor Axi... |
| DataSheet: |  FCR-50JT-52-200K Datasheet/PDF |
| Quantity: | 1000 |
| 5000 +: | $ 0.00589 |
| Series: | FCR |
| Packaging: | Tape & Box (TB) |
| Part Status: | Active |
| Resistance: | 200 kOhms |
| Tolerance: | ±5% |
| Power (Watts): | 0.5W, 1/2W |
| Composition: | Carbon Film |
| Features: | Flame Proof, Safety |
| Temperature Coefficient: | 0/ -700ppm/°C |
| Operating Temperature: | -55°C ~ 155°C |
| Package / Case: | Axial |
| Supplier Device Package: | Axial |
| Size / Dimension: | 0.130" Dia x 0.354" L (3.30mm x 9.00mm) |
| Height - Seated (Max): | -- |
| Number of Terminations: | 2 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
!Through Hole Resistors, such as the FCR-50JT-52-200K, are components used for mounting electronics between a board and board or chassis. The main purpose of these Through Hole Resistors are to limit or regulate current flow in the circuit. This is usually accomplished by adjusting the resistance of the resistor to a set level.
The FCR-50JT-52-200K Through Hole Resistors are typically used in a variety of applications, including home, office, and industrial applications. These devices have a variety of sizes and configurations, depending on the application. They are generally available in between 0.5 and 200ohm resistances.
The FCR-50JT-52-200K Through Hole Resistors are typically used for:
- High current circuits
- Low Voltage Supplies
- Battery Charging / Discharging Circuits
- Power Supplies
- Low Power Applications
- Signal Processing
- High Speed Circuitry
The working principle of the FCR-50JT-52-200K Through Hole Resistors is fairly simple. It works by utilizing a resistor element to reduce the flow of electricity through the circuit. The resistor element is usually made of a type of metal or ceramic material, and the resistance is usually adjusted by the manipulation of the material or by using a special coating. The resistance of the resistor will change depending on the amount of current that passes through it.
To install the FCR-50JT-52-200K Through Hole Resistor, it must be placed between two conductors and connected using soldered connections. The installation must be done by a qualified technician or electrician in order to ensure proper installation and performance. Additionally, through hole resistors should only be installed in high voltage or short circuit applications.
The main advantage of using Through Hole Resistors is that they are relatively low cost and can be easily installed in a variety of applications. Additionally, through hole resistors are less likely to cause circuit damage due to their durability and overall reliability. Through hole resistors can also be used to reduce the amount of voltage or current in a circuit, depending on what is needed. This makes them useful for a variety of applications.
In conclusion, the FCR-50JT-52-200K Through Hole Resistors provide users with an affordable and reliable solution for many current limiting or voltage regulation applications. They can be easily installed by a qualified technician or electrician and are less likely to cause any circuit damage. Furthermore, through hole resistors are great for lower power applications and can reduce the amount of current in the circuit when needed.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...