FFSD-17-D-03.50-01-N-RW-R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rectangular Cable Assemblies

FFSD-17-D-03.50-01-N-RW-R is a type of rectangular cable assembly. It is commonly used in industrial, aerospace, and military applications. Square and rectangular cables are usually used in tight spaces where flexibility is needed. They provide a reliable electrical connection between two points, while still being able to be manipulated into different configurations.

This type of cable assembly is a single ended cable. It has a 0.050 inch diameter, a 2.0 mm pitch, and a 120° total cable sweep. The cables are made of plastic, polyurethane, polyethylene, or polytetraflouroethylene (PTFE) material. Also, it is a flush-mounted cable with a maximum insertion depth of 0.750 inches. The contact pins on the cable are made of brass or copper and are gold plated to ensure proper electrical contact.

When designing applications for cables, attention should be given to mechanical, electrical, and environmental requirements. FFSD-17-D-03.50-01-N-RW-R cable is designed to meet various resistance, current, and vibration requirements. Since its insulation is made out of polyurethane, these cables are designed to have good chemical resistance and a wide temperature range. The insulation\'s material is capable of withstanding temperatures as high as +150°C.

To ensure maximum durability and reliability, this type of rectangular cable assembly is designed to be robust and is equipped with crimp pins and terminals which are made of pure copper and are nickel or gold plated. On the other hand, the insulation material includes PUR, PTFE, PA12, and PFA. In addition, these cables are also designed to have flexible cables and are designed to be abrasion resistant and flame retardant.

FFSD-17-D-03.50-01-N-RW-R cables are designed to have a wide variety of connection options. These cables are designed to accommodate both flat and round cable ends and can be cut in different sizes. Furthermore, they can also be configured with different types of jacketing, as well as strain relief boots. The cable assembly is designed to be robust, reliable, and safe to use in applications that require fast and efficient signal transmissions.

In terms of its working principle, FFSD-17-D-03.50-01-N-RW-R cable assemblies consists of two conduction wires, a dielectric material, and a shielding layer. The signal is transmitted from the source to the destination through two wires, a ground and a neutral wire. The dielectric material between the wires helps to ensure that the signal is properly shielded from external noise. Finally, the shielding layer helps to prevent any further interference from other signals.

FFSD-17-D-03.50-01-N-RW-R rectangular cable assemblies are designed to provide electrical connections in a wide range of industrial, aerospace, and military applications. Their construction allows them to be used for different types of applications, while still providing a reliable connection and fast signal transmissions. They have a wide variety of connection options, and are designed to be robust and reliable.

The specific data is subject to PDF, and the above content is for reference