FJ-10-D-24.00-4 Allicdata Electronics
Allicdata Part #:

FJ-10-D-24.00-4-ND

Manufacturer Part#:

FJ-10-D-24.00-4

Price: $ 7.15
Product Category:

Cable Assemblies

Manufacturer: Samtec Inc.
Short Description: 1MM FLEX CABLE JUMPER
More Detail: Position Cable
DataSheet: FJ-10-D-24.00-4 datasheetFJ-10-D-24.00-4 Datasheet/PDF
Quantity: 1000
Lead Free Status / RoHS Status: Lead free / RoHS Compliant
1 +: $ 6.50790
Stock 1000Can Ship Immediately
$ 7.15
Specifications
Series: *
Part Status: Active
Lead Free Status / RoHS Status: --
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

FJ-10-D-24.00-4 Application Field and Working Principle

Flat Flex (FJ) Jumper Cables are usually used in tight spaces and locations where curvature space is limited. The FJ-10-D-24.00-4 model has a 10-pin flat flex connector on one end and a dual 24-pin header on the other. These cables are typically used as a jumper between a motherboard and power supplies, or any other component requiring jumpers.

The FJ-10-D-24.00-4 model is typically constructed using a wire and insulation material combination which makes it an extremely flexible cable. The cables are insulated to protect the electrical components from a potential short circuit. This insulation also assists in reducing ambient noise that could potentially interfere with other components.

When the FJ-10-D-24.00-4 model is used, a power supply must be connected to both ends of the cable, ensuring the correct voltage has been selected for the particular application. This model is typically used in PC systems, servers, or any other system that requires a power supply to the motherboard. The FJ-10-D-24.00-4 is usually connected directly to the motherboard and then connected to the power supply via the power supply’s independent power cable. The other end of the cable is connected to the power supply, again ensuring the correct voltage is selected for the application.

The working principle of the FJ-10-D-24.00-4 model is fairly simple. The FJ-10-D-24.00-4 model is connected between the motherboard and power supply, with the 10-pin flat flex connector attached to the motherboard and the 24-pin header attached to the power supply. This allows the power to be transmitted between the motherboard and power supply. It is important that the correct voltage is selected for the application as incorrect voltage can damage both the motherboard and power supply.

The FJ-10-D-24.00-4 model is a flexible, versatile and cost-effective method of supplying power to a system while maintaining tight space requirements. This model is also relatively simple to install and does not require any special tools or skills to connect the cables. This makes it an ideal choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Latest Products
0151660307

CABLE FFC 28POS 0.50MM 8"28 Position FFC...

0151660307 Allicdata Electronics
0210390845

CABLE FFC 15POS 1.00MM 7"15 Position FFC...

0210390845 Allicdata Electronics
0210390734

CABLE FFC 5POS 1.00MM 7"5 Position FFC, ...

0210390734 Allicdata Electronics
0210390525

CABLE FFC 34POS 1.00MM 9"34 Position FFC...

0210390525 Allicdata Electronics
0210390372

CABLE FFC 20POS 1.00MM 9"20 Position FFC...

0210390372 Allicdata Electronics
0210200154

CABLE FFC 14POS 0.50MM 8"14 Position FFC...

0210200154 Allicdata Electronics