FJ-10-D-64.00-4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flat Flex, Ribbon Jumper Cables: The FJ-10-D-64.00-4 application field and working principle

Flat flex or ribbon jumper cables, such as the FJ-10-D-64.00-4, are widely used in various industries and applications, due to their versatility, compactness, and robustness. The FJ-10-D-64.00-4 has been designed for reliable connections, primarily for medical, motor, and process control applications.

Connecting the FJ-10-D-64.00-4

Connecting the FJ-10-D-64.00-4 is a relatively simple task, even for beginners. First, the jumper must be laid out straight with the tabs at each end at a 90 degree angle. The tabs must be at the same level as the body of the jumper cable. Then, the two sides of the jumper must be inserted into the jumper ports on the device or circuit board. To ensure good adhesion, users should make sure that all of the contacts are wedged into the ports. If necessary, the jumper can be formed to fit the ports by heating it with a soldering iron. Finally, the pins should be tightly soldered into the ports.

Advantages of using the FJ-10-D-64.00-4

The FJ-10-D-64.00-4 has a range of advantages that make it suitable for various medical, motor, and process control applications. First, its robust construction ensures that it is highly reliable and that it can withstand accidental jolts and vibrations. Second, the cable is highly flexible and can be bent into curves and tight formations without losing its properties. This makes it useful for applications where connections need to be made in tight spaces. Third, the FJ-10-D-64.00-4 is designed to ensure that the pins remain accurately aligned, even in the most extreme conditions. This accuracy reduces signal losses and ensures that electrical signals are transported reliably.

Working principle of the FJ-10-D-64.00-4

The FJ-10-D-64.00-4 works on a simple principle. The jumper is made up of two wires that are connected to two pins which act as electrical contacts. The connections between the two wires and the pins transfer electrical signals between the device or circuit board and the jumper cable. In order for the connection to remain reliable, the connections between the two wires and the pins must remain secure. This is accomplished by tightly soldering the pins into the ports.

Conclusion

The FJ-10-D-64.00-4 is a versatile and reliable flat flex or ribbon jumper cable that is suitable for use in medical, motor, and process control applications. It is highly robust and flexible, and its accurate pin alignment reduces signal losses. Its simple design and installation makes it suitable for use even by beginners.

The specific data is subject to PDF, and the above content is for reference