FJ-20-D-03.94-4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flat flex ribbon jumper cables are flat cables that run along the entire length of an electronic device. They are made with two flat conductor strips, which are connected by a thin insulation material. Some flat flex ribbon jumper cables have a flexible dielectric film between the conductors. This arrangement allows for high flexibility, as the flat flex ribbon jumper cable can be bent and twisted in any direction without affecting the electrical conductivity.

The FJ-20-D-03.94-4 is a flat flex ribbon jumper cable that features a four-pair configuration. It is made with stranded, flat conductor strips covered in a tinned copper braid. The insulation material is an ethylene-propylene-di-electric (EPDM), which is rated for exceptional low-temperature performance. The FJ-20-D-03.94-4 is suitable for a wide variety of applications, such as telecommunications, high-speed data communication, and in industrial applications.

The FJ-20-D-03.94-4 has a AWG (American Wire Gauge) size of 20. This indicates that the cable has a conductor of diameter that is approximately 0.032 inches (0.81 millimeters). The distance between centerlines is 3.94 mm, which is suitable for a wide array of crimp terminations. The tinned copper braid shielding provides adequate protection against EMI (electromagnetic interference). The FJ-20-D-03.94-4 also has a voltage rating of up to 600 V, making it suitable for a wide range of power delivery applications.

The FJ-20-D-03.94-4 flat flex ribbon jumper cable is ideal for applications that require high flexibility and good electrical conductivity. It can be used in a range of industrial applications, such as robotics, where flexible cables are required to connect different parts of the mechanism. The cable can also be used in telecommunications applications, where it can be used to connect fixed wiring to moveable devices. The FJ-20-D-03.94-4 is also suitable for high-speed data transmission, such as a Mobile Ethernet system.

The working principle behind the FJ-20-D-03.94-4 is relatively simple. When the cable is connected to a device, an electrical charge is created. This charge passes through the flat conductor strips and is applied to the device. The flat conductors provide a low resistance to electricity, meaning that the cable can transmit a large amount of power with minimal power loss. The EPDM insulation material also protects the flat conductors from any damage caused by temperature or environmental factors.

The FJ-20-D-03.94-4 is an excellent choice for a wide range of applications. It is highly flexible, provides excellent electrical conductivity, and can withstand a wide temperature range. The cable is also suitable for high-speed data transmission, and is protected from EMI interference. All these factors make the FJ-20-D-03.94-4 flat flex ribbon jumper cable an ideal choice for many electronic applications.

The specific data is subject to PDF, and the above content is for reference