FJ-20-D-60.00-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flat Flex Ribbon Jumper Cables

Flat Flex Ribbon Jumper Cables are a type of cable used to connect electronic components across printed circuit boards. They are ideally suited for applications where space is at a premium, and they require minimal board space. The flat flex ribbon jumper cable FJ-20-D-60.00-30 is a double sided cable with 0.60mm pitch, providing 30 connecting points per inch.

Application Fields of Flat Flex Ribbon Jumper Cables

Flat Flex Ribbon Jumper Cables are used in a wide variety of applications requiring secure electronic connections in limited space. Some of the most common application fields include:

• Small consumer electronics such as digital cameras, cell phones, PDAs
• Small computer boards
• Medical equipment such as endoscopes
• Avionics systems
• Automotive electronics

Flat Flex Ribbon Jumper Cables are also used in other specialty applications such as robotic systems, electronic musical instruments, and touch screens.

Working Principle of Flat Flex Ribbon Jumper Cables

Flat Flex Ribbon Jumper Cables work on a simple principle. The flat flex ribbon contains conductors between the layers of insulation, and a contact point is formed on each layer at the point where the conductors intersect. The contact points are then soldered to the printed circuit board, connecting the components. The flat flex ribbon is manipulated by the user and affixed to the board in the required location.

Due to the size limitation of the cable, minimal room is available to run the wire, and the flat flex ribbon acts as a support cable to the board, transferring data from one side to the other. The flexibility of the cable allows for routing within tight constraints and it ensures good electrical contact and reliable data transmission.

Advantages of Flat Flex Ribbon Jumper Cables

The main benefit of using Flat Flex Ribbon Jumper Cables is the ability to save board space, as they require minimal board real estate due to their thin design. The cables can enable the connector to move with the cable, thereby allowing access to multiple areas of a PCB. This reduces the need for additional cable runs as often needed with other cabling types.

The cables are also designed for superior electrical performance and signal integrity. The wires used in the cables are designed for low voltage, low current applications, and are insulated for enhanced insulation. The flat flex ribbon also provides flexibility and protection against mechanical stresses and bending.

Flat Flex Ribbon Jumper Cables provide a high-quality solution for a wide range of applications, and are designed to ensure reliable data transmission and secure connections in limited space.

The specific data is subject to PDF, and the above content is for reference