FKM-75KT-73-330R

Series:	FKM
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	330 Ohms
Tolerance:	±10%
Power (Watts):	0.75W, 3/4W
Composition:	Wirewound
Features:	Flame Proof, Fusible, Safety
Temperature Coefficient:	±150ppm/°C
Operating Temperature:	-55°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.142" Dia x 0.390" L (3.60mm x 9.90mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors and FKM-75KT-73-330R

Through hole resistors are electronic components used in circuits to control and regulate the current flow. They are most commonly used in power applications, such as in motor control applications, and are also used in the automotive and military industries. The FKM-75KT-73-330R is a type of through-hole resistor with a resistance value of 330 ohms, a wattage of 75W, and a tolerance of ±5%. It is typically used in motors and other high-power applications due to its high wattage rating.

Working Principle of Through Hole Resistors

The working principle of a through-hole resistor is simple. It consists of a conductor, usually a metal or alloy, that is shaped into a flat disk or a spiral. These conductors are then stuck into a hollowed-out hole in the housing of the resistor, which is typically made of plastic. As current passes through the contact points, the resistance is applied due to the metal\'s resistance to current flow. This resistance induces a voltage drop, which is used to regulate the current and can be adjusted depending on the desired level of current control.

Application Fields of FKM-75KT-73-330R

The FKM-75KT-73-330R is a high-powered through-hole resistor, which makes it well-suited for a variety of applications. Its high wattage rating allows it to be used in motor control and automotive applications, as well as in the military and aerospace industries. The FKM-75KT-73-330R can also be used in home electronics, such as air conditioners, washing machines, and ovens, as well as in industrial applications such as factory automation and robotics. Due to its high wattage rating, the FKM-75KT-73-330R can also be used in high-power audio applications, such as public address systems and sound systems.

Advantages of Through Hole Resistors

Through hole resistors offer a number of advantages over other types of resistors, such as surface mount components. One of the main benefits of through-hole resistors is their ability to dissipate heat more effectively, allowing them to handle higher wattage levels and operate at higher temperatures. Through-hole components also offer superior stability and reliability due to their rigid construction, as they are less likely to be affected by external vibration or shock. Finally, through-hole resistors can be easily replaced in the event of failure. This is particularly useful in high-powered applications, such as motor control, where failure is not an option.

Cost of FKM-75KT-73-330R

Due to its high wattage rating, the FKM-75KT-73-330R is a relatively expensive component. Depending on the company and quantity purchased, the cost can range from a few dollars to several hundred dollars for a single unit. The cost of installation is also a factor, as the FKM-75KT-73-330R must be soldered to the circuit board. This increases the overall cost of the part, but also makes it more secure and reliable.In conclusion, the FKM-75KT-73-330R is a high-powered through-hole resistor that can be used in a variety of applications, from consumer electronics to motor control applications. Its high wattage rating makes it well suited for high-powered applications, while its rigid construction and ease of replacement makes it an attractive choice for a variety of applications. While the cost of the FKM-75KT-73-330R is relatively high, its superior performance and reliability make it worth the investment.

The specific data is subject to PDF, and the above content is for reference