FKN1WSJR-52-3R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are used for a variety of applications, including AC and DC circuits. The FKN1WSJR-52-3R Through Hole Resistor is a high precision, low-noise resistor. It is a matched pair of resistors, with the same resistance value, and is typically used for AC applications. The FKN1WSJR-52-3R Through Hole Resistor is an ideal choice for applications where precision is required and noise must be kept at a minimum.

The FKN1WSJR-52-3R Through Hole Resistor is a high stability resistor, which has a low temperature coefficient. This makes it ideal for precision measurements, and it can also be used in high frequency AC applications. The resistance value of the FKN1WSJR-52-3R is repeatable and very stable over time. This type of resistor can be used in series with other resistors and capacitors to provide very low noise performance even at high frequencies.

The FKN1WSJR-52-3R Through Hole Resistor has a low tolerance of only ±1%. This means that the resistance between ends of this type of resistor will not significantly vary, even in different temperatures and frequencies of operation. This low tolerance also allows the resistor to provide more precise measurements and greater accuracy than other types of resistors.

The FKN1WSJR-52-3R can be used in a wide variety of applications including power supplies, signal processing, and test and measurement applications. In power supplies, the FKN1WSJR-52-3R can be used to limit the voltage between two points. In signal processing applications, it can be used to filter out unwanted signals, while allowing desired signals to pass through. In test and measurement applications, it can be used to measure signals that are too small to be detected by traditional resistors. In any of these applications, the FKN1WSJR-52-3R Through Hole Resistor can provide high accuracy and low noise performance.

The FKN1WSJR-52-3R Through Hole Resistor also has a frequency response range of up to 500 MHz. This makes it an ideal choice for low-noise applications that require high frequency and high precision. The FKN1WSJR-52-3R Through Hole Resistor is also highly resistant to electromagnetic interference, and as such, it can also be used in sensitive applications where EMI must be kept to a minimum.

The FKN1WSJR-52-3R Through Hole Resistor operates in linear characteristics, meaning that the resistance does not depend on the current. This makes it ideal for applications where a stable voltage drop is desired. The FKN1WSJR-52-3R Through Hole Resistor can also be used as a “pull up” or “pull down” resistor, where one end of the resistor is connected to a voltage that is greater than or less than ground potential.

In conclusion, the FKN1WSJR-52-3R Through Hole Resistor is an excellent choice for applications where precision, low noise, and high-frequency performance are required. The resistor has a low tolerance, a low temperature coefficient, and a high stability. It can be used in a variety of applications, including power supplies, signal processing, and test and measurement. It is also highly resistant to EMI and can provide accurate measurements even in high-frequency applications.

The specific data is subject to PDF, and the above content is for reference