FMP-50FTF52-14K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors (THRs) have been widely used in many electronic applications for decades. The most common type of THR is the FMP-50FTF52-14K, which is a through-hole carbon-film resistor with a tolerance of 5%. This THR is noted for its stability and reliability and is used in a variety of applications.

The FMP-50FTF52-14K through-hole resistor is typically used in power supplies, guitars, amplifiers, audio systems, and telecommunication equipment. It is also used as a voltage regulator, current limiter, or non-inductive resistor in motors, robotics, solenoids, and other sensitive applications.

The FMP-50FTF52-14K through-hole resistor has a resistance of 0.5 ohms, a total capacitance of 14 kohms, and a temperature range of -55°C to 155°C. Its power dissipation is 4 watts and the voltage rating is 300V. The resistor has a tolerance of 5%, a temperature coefficient of ±200ppm/°C, and an inductive reactance of 12 μH. The resistor also has a high reliability, with a maximum failure rate of 0.2% per 1000 hours.

The working principle of the FMP-50FTF52-14K THR is simple. It is basically a resistor that limits the flow of current in a circuit. The resistor achieves this by creating a voltage drop between two points in the circuit. This voltage drop is proportional to the resistor\'s resistance value. As current passes through the resistor, some of the energy is lost as heat. This heat must be dissipated in order to prevent the resistor from overheating and burning out.

The FMP-50FTF52-14K THR also provides protection against voltage spikes, current surges, and short circuits. It helps regulate the current and stabilize the voltage in the circuit. Thus, THRs are often used in sensitive applications, such as in medical and industrial equipment.

In summary, the FMP-50FTF52-14K THR is used in a variety of applications, such as power supplies, guitars, amplifiers, audio systems, and telecommunication equipment. Its working principle is simple, as it limits the flow of current in a circuit by creating a voltage drop between two points in the circuit. The resistor also provides protection against voltage spikes, current surges, and short circuits by helping regulate the current and stabilize the voltage in the circuit. It has a tolerance of 5%, a temperature coefficient of ±200ppm/°C, and an inductive reactance of 12 μH. This THR is noted for its stability and reliability and is used in many sensitive applications.

The specific data is subject to PDF, and the above content is for reference