FMP-50JT-52-22K

Through Hole Resistors are widely used in various electronic circuits and devices, from consumer electronics to sophisticated industrial and aerospace applications. The FMP-50JT-52-22K is a type of through hole resistor with specific design and characteristics that make it appealing for certain applications.

The construction of FMP-50JT-52-22K is comprised of two concentric rings. The outer ring is made of manganese bronze or copper and serves to provide a reliable connection to the electronic device. The inner ring is a non-conductive polymer, such as polyethylene or polytetrafluoroethylene. The combination of the two rings creates a very low-impedance connection with low electrical noise.

The resistance value of the FMP-50JT-52-22K is precisely etched on the inside of the outer ring, which is created during the production process. This value is usually represented as an Ohm (Ω) value, and can range from a few hundred ohms all the way up to a few millions ohms. This allows the FMP-50JT-52-22K to be used in a variety of applications with different resistance requirements.

The FMP-50JT-52-22K is primarily used in circuits that require static current resistance such as voltage dividers, low-noise amplifiers, and source resistors. In each of these circuits, the resistor provides a static resistance to the flow of current. This helps to maintain the desired voltage level in the circuit, or to reduce electrical noise in sensitive components.

The working principle of the FMP-50JT-52-22K is relatively simple. As electrical current passes through the resistor, some of the voltage is “dropped” across the resistance. The amount of voltage that is dropped depends on the size of the resistor and the amount of current that is being supplied. Once the voltage is dropped, the remaining current will continue to flow through the circuit, providing voltage to the components downstream.

In short, the FMP-50JT-52-22K is a through hold resistor with a precise resistance etched onto the inner ring. It is a low-impedance resistor with low electrical noise, and it is primarily used as a static current resistor in applications where precise voltage levels and low noise are desired.