FMP200FBF52-90R9

Series:	FMP
Packaging:	Bulk
Part Status:	Active
Resistance:	90.9 Ohms
Tolerance:	±1%
Power (Watts):	2W
Composition:	Metal Film
Features:	Flame Proof, Safety
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.154" Dia x 0.354" L (3.90mm x 9.00mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are one of the oldest resistor designs on the market, mainly used for low-frequency circuits. They are composed of two metal leads passing through a ceramic body. This type of resistor is commonly used in power supplies, radios, and other applications where higher power ratings are required. The FMP200FBF52-90R9 is a through hole resistor that is employed for a variety of applications.

FMP200FBF52-90R9 Application Fields

The FMP200FBF52-90R9 is a power-resistant through hole resistor. It is capable of handling a maximum power of 200 watts (W). It is especially suitable for high power applications. The FMP200FBF52-90R9 is predominantly employed in a wide range of commercial, industrial, and consumer electronics, such as computers, PCBs, televisions, radios, batteries, and power supplies.In addition, the FMP200FBF52-90R9 is manufactured to meet the safety requirements of the EU and the United States industry standard. It is also designed for exposure to moisture, temperature, and humidity. The aluminum-coated resin protects the resistor body against harsh conditions, helping to increase its life.

FMP200FBF52-90R9 Working Principle

The FMP200FBF52-90R9 resistance occurs when current is forced to pass through the ceramic body or resistor. Each resistor has two leads; one is connected to the positive terminal of the power source, while the other is connected to the negative terminal. The current is said to be flowing from the positive to the negative terminal of the power source. The current flow will form a loop between the two leads and the resistor, as it is forced to pass through the resistor.When current passes through the resistor, it will begin to dissipate, causing an increase in resistance. This in turn reduces the amount of current that is able to pass through the resistor. This is referred to as Ohm’s law, and it states that the ratio between the voltage and current across the resistor is equal to its resistance. Thus, the resistance of the FMP200FBF52-90R9 is determined by its size and material.The FMP200FBF52-90R9 features an aluminum-coated ceramic body and nickel-plated leads to increase its strength and insulation. This makes it ideal for harsh environment applications. The FMP200FBF52-90R9 is typically able to resist temperatures up to 350°C, so it can be used for high power applications.In addition, the FMP200FBF52-90R9 is able to withstand a maximum peak power of 200 W. This makes it an ideal choice for applications with high energy requirements, such as those found in power supplies and other high-powered electronic systems.

Conclusion

Through hole resistors have been around for many decades, and the FMP200FBF52-90R9 is one of the best examples of them on the market. It offers a maximum power of 200 W, which makes it ideal for high power applications. It is also highly resistant to temperature, moisture, and humidity, thanks to its aluminum-coated ceramic body and nickel-plated leads. The FMP200FBF52-90R9 also meets EU and U.S. safety standards, making it one of the most reliable and durable resistor designs available.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description