FMP200FRE52-270R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors, also known as leaded resistors, are electrical components designed to limit or regulate the flow of electrical current in an electronic circuit. The FMP200FRE52-270R is a rigid-frame, leaded resistor with a 270 ohm value. The resistor has 2 x 0.5 watt power rating with 2.3W T.C.R, ±5%-tolerance, and 5ppm/°C of temperature coefficient of resistance.

Applications for the FMP200FRE52-270R Through Hole Resistor include automotive circuits, telecommunications circuits, digital and audio circuits, mobile electronics, and a wide range of industrial and consumer applications. In automotive applications, it can be used for precision conductance measurements, current-limiting resistors for both RC and LC motor circuits, fuel injection systems, amplifiers, and reversing circuits. It is also effective in telecommunications circuits and digital and audio circuits. Mobile electronics such as tablets, laptops, and cellphones use this resistor in power modulation and signal processing.

The working principle of the FMP200FRE52-270R Through Hole Resistor is simple. An electric current flows through the resistor, and a part of that current is converted to heat because of the resistance of the material. The current is reduced to the desired level, and the excess energy is dissipated as heat through the resistor.

The FMP200FRE52-270R Through Hole Resistor is constructed from two metal strips, which are insulated from one another to prevent any accidental contact. The ends of the resistor are connected to the connecting leads. The resistance of the resistor is determined by the ratio of the width and the length of the resistor. The wider the width and the shorter the length of the resistor, the lower the resistance will be. The resistance of the resistor is also determined by the material of which it is made.

In order to make sure that the FMP200FRE52-270R Through Hole Resistor works accurately and efficiently, it is very important to install it correctly. The resistor should be placed close to the circuit board in order to reduce the amount of inductance and other stray capacitances. The leads should be correctly inserted into the circuit board according to the instructions, and the resistor should be firmly soldered to the board.

The FMP200FRE52-270R Through Hole Resistor is a versatile and reliable component for many electronic circuits. It can be used in a wide range of applications from automotive circuits to mobile electronics. Its working principle is quite simple and it is easy to install. Its construction of two metal strips, insulated from one another, gives it a high degree of precision and reliability, making it a popular choice among engineers and technicians.

The specific data is subject to PDF, and the above content is for reference