FMP200FRF52-21K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are one of the most common types of electrical components in the electronics industry. Among these components is the FMP200FRF52-21K. It consists of a resistance element housed inside a ceramic case, along with a leaded wire connection providing the necessary connections to the circuit.

The FMP200FRF52-21K is a through hole resistor with an impedance value of 200Ω and a tolerance of ±10%. It is typically used in applications such as power supply, audio, switching, and low-power and medium-power motor control circuits.

The working principle of the FMP200FRF52-21K is based on the concept of Ohm\'s Law, which states that the current flow through a resistance is directly proportional to the voltage applied across it. In other words, if the voltage applied across a resistor is increased, the current through it would also increase. Similarly, if the voltage is decreased, the current would also decrease accordingly.

The FMP200FRF52-21K has several advantages over other types of resistors, such as:

• It has a better power dissipation capability
• It provides superior protection against transient over-voltage and inrush current
• Its electrical insulation is superior, providing additional safety
• It can be used in controlled impedance circuits such as those found in high-speed digital designs

However, the FMP200FRF52-21K also has some disadvantages, such as:

• It is relatively expensive compared to other resistor components
• There is a risk of thermal runaway, which can result in component failure
• It is not suitable for high-voltage applications, as the ceramic case may be prone to cracking

In conclusion, the FMP200FRF52-21K is a through hole resistor typically used in applications such as power supply, audio, switching, and low-power and medium-power motor control circuits. It has several advantages over other types of resistors, such as better power dissipation capability, superior protection against transient over-voltage and inrush current, and excellent electrical insulation. However, it is relatively expensive compared to other resistor components and should not be used in high-voltage applications.

The specific data is subject to PDF, and the above content is for reference