FMP200FRF52-232R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through-hole resistors have been used extensively in electronics since the dawn of the semiconductor age, and have become one of the most important components in the electronics industry. The FMP200FRF52-232R is an example of such a component.

The FMP200FRF52-232R is a type of through hole resistor made by Fine Metal Products. It is a small and reliable component that is designed for use in high temperature environments. Like other resistors, it has two terminals, one for connection of the load, and one for connection of a reference voltage. It works by limiting the amount of current that can flow between the two terminals. The amount of current is determined by the resistance value of the resistor.

The FMP200FRF52-232R is an axial lead resistor, which means that it is composed of two leads that are connected together in the center of the component. The lead lengths are 0.157 inch and 0.157 inch, respectively. The component can handle a maximum of 200 watts at a maximum voltage of 500 volts. It is designed to operate in temperatures between -55°C and +155°C.

The FMP200FRF52-232R is typically used in power control systems, as it can handle high power levels without overheating. It is also used in circuits that require protection from induced noise, as it can help reduce the amount of noise that can enter other parts of the circuit. Furthermore, it can be used in circuits that are hot environments, as it can handle the higher temperature levels without breaking down.

The FMP200FRF52-232R operates on a simple principle. When a voltage is applied to the two terminals, the current is governed by Ohm’s law. This law states that the current flowing through a resistor is proportional to the voltage across it, so the current is limited by the resistance value of the resistor. The more resistance the resistor has, the lower the amount of current that can flow through it. The size of the resistor is determined by the amount of power that it is designed to handle, so higher power components will be larger in size.

The FMP200FRF52-232R is one of the most reliable components available for through-hole resistors. It is small, durable and can handle high levels of power. It is commonly used in power electronics, noise reduction circuits, and circuits designed for high temperature environments. The component works on the simple principle of Ohm’s law, limiting the amount of current that can flow between two points, and can be counted on to provide reliable performance even in the most hostile of environments.

The specific data is subject to PDF, and the above content is for reference