FMP200FRF52-24R3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Through hole resistors are one of the most common electronic components today, and they are usually referred to as either axial or radial type. These are very small electrical components that have two leads, which are usually plated with both end caps. These end caps are usually plated with either gold or silver and they are inserted into a circuit board, making them ideal for use in high-voltage applications. They are also highly reliable and cost-effective.

FMP200FRF52-24R3 Application Field and Working Principle

FMP200FRF52-24R3 is an axial type through hole resistor that has a resistance value of 200 ohms. Its two leads are 24mm long and are made of metal-plated phosphorous bronze. The main purpose of this component is to reduce the current in a circuit in order to provide a given level of functionality. This is achieved by the action of the resistor; which has a high-value resistance, thereby decreasing the flow of electric current through it. The current flow that is allowed to pass through the resistor is proportional to the value of the resistor that is used.

The working principle of this type of resistor is based on Ohm\'s law. This states that the current (I) passing through a resistor is equal to the voltage (V) across the resistor divided by the resistance value (R). This aspect makes the resistor a very essential part of most electrical and electronic circuits.

FMP200FRF52-24R3 can be used in a wide variety of applications, including power supplies, signal processing, audio circuits, and test equipment. It can also be used to provide a circuit protection measure in order to prevent damage caused by overloading the circuit. This type of resistor is often used in AC and DC circuits and can be used for both high- and low-voltage operation. It is also available in various resistance levels, making it highly versatile and suitable for a wide range of applications.

Advantages and Disadvantages of Using Through Hole Resistors

One of the main advantages of using through hole resistors is that they are very reliable and cost-effective. They provide excellent performance due to their reliable construction and long-term stability. They are also highly durable and resistant to environmental factors such as shock, vibration and heat. Moreover, through hole resistors are relatively easy to install and require little or no maintenance.

However, a major disadvantage of using through hole resistors is that they occupy a lot of circuit board space. This can be especially problematic in smaller or more complex circuits that have to fit a lot of components. Also, through hole resistors tend to be more expensive than other types of resistors, such as surface mount resistors, and may not be suitable for large-scale production.

Conclusion

Through hole resistors are widely used in a variety of electronic and electrical circuits and prove to be valuable components in both high- and low-voltage contexts. FMP200FRF52-24R3 is a particularly effective axial type through hole resistor that is able to reduce the current in a circuit to provide a given level of functionality. Despite its effectiveness, using through hole resistors can occupy a lot of circuit board space and be more expensive than other types of resistors.

The specific data is subject to PDF, and the above content is for reference