FMP200FRF52-82R

Through Hole Resistors are fundamental components for electronic circuits and are used to control and limit current, divide voltage, and set reference voltages. The FMP200FRF52-82R series of Through Hole Resistors are a special range, allowing for greater accuracy, high rated power, and increased stability. This article will discuss the application field and working principle of the FMP200FRF52-82R Series of Through Hole Resistors.

The FMP200FRF52-82R Series of Through Hole Resistors are particularly useful for applications where the circuit needs high accuracy in terms of resistance values. These parts are available with an accuracy rating of 4%, and offer superior stability compared to other Through Hole Resistors. In addition, the FMP200FRF52-82R Series parts can handle much higher power ratings than comparable Through Hole Resistors, up to 200 Watts. This makes them suitable for applications where high power is required, such as motor control, lighting, and many industrial processes.

The FMP200FRF52-82R Series Through Hole Resistors are constructed from a number of different materials, including metal oxide film, cermet (ceramic-metal combination), metal-clad film and carbon film. Each material type has its own unique characteristics and utilizes different processes for constructing the part. As a result, the FMP200FRF52-82R Series Through Hole Resistors provide a wide range of resistive values, from 1 Ohm to 100 kilo Ohms.

The working principle of the FMP200FRF52-82R Series Through Hole Resistors is based on the relationship between current and voltage. Every resistor has a specific resistance value (Ohms) that is determined by the cross-sectional area of the resistor material. When a voltage is applied across the terminals of the resistor, a current will flow through it, and the resistance value will determine the amount of current flowing through the resistor. This relationship is known as Ohm\'s Law, and it forms the basis of the working principle of the FMP200FRF52-82R Series Through Hole Resistors.

In addition to controlling the flow of current, the FMP200FRF52-82R Series Through Hole Resistors can be used to create a reference voltage. This is achieved by connecting several resistors in series or parallel, forming a voltage divider. When connected in this way, the resistors will divide the applied voltage depending upon their individual resistance values, resulting in a reference voltage being produced.

The FMP200FRF52-82R Series of Through Hole Resistors is a widely used part type, due to its high accuracy, stability, and power ratings. Its wide range of available resistance values makes it suitable for a variety of different applications, such as motor control, lighting, and industrial processes. Finally, the underlying working principle of the FMP200FRF52-82R Series of Through Hole Resistors is based on Ohm\'s Law, which states that the current through a resistor is determined by the applied voltage and the resistance value. This is the fundamental principle of all resistance-based components.