Series:	FMP
Packaging:	Bulk
Part Status:	Active
Resistance:	2.2 Ohms
Tolerance:	±5%
Power (Watts):	2W
Composition:	Metal Film
Features:	Flame Proof, Safety
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.154" Dia x 0.354" L (3.90mm x 9.00mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are an essential component of electronics applications. They are used to adjust the voltage of an analog circuit, distribute current, adjust power levels, or even act as a stand-in for a switch. FMP200JB-52-2R2 is one of the most popular through hole resistors available on the market. This article will discuss the application fields of the FMP200JB-52-2R2 and its working principle.

Application fields

One of the most common uses of the FMP200JB-52-2R2 is in input/output (I/O) circuit designs. The I/O circuitry, along with the FMP200JB-52-2R2 resistors, helps ensure that digital signals within the circuit remain within acceptable voltage levels. The FMP200JB-52-2R2 is commonly used in industrial automation and control systems, such as in the manufacturing of sensors and actuators.In addition to input/output (I/O) circuitry, the FMP200JB-52-2R2 is also used in power supplies. It is used in DC/DC converters to smooth out any AC voltage ripple that might occur during power conversion. The resistor also helps regulate the current flow within a power supply, enabling the power supply to be tuned to deliver a specific output. This ensures that the correct amount of power is being delivered to the load.Finally, the FMP200JB-52-2R2 can also be used as a switch, due to its current-limiting capability. This makes it ideal for short-term activation of a device, such as controlling valves or motors.

Working Principle

The FMP200JB-52-2R2 is designed to provide current limiting in order to protect electronic components from potential damage. This type of resistor has a very low resistance value, usually between one and three ohms. The resistors work by creating a voltage drop across them, which limits the amount of current that can pass through them. This voltage drop is determined by Ohm\'s law, which states that the voltage drop across a resistor is equal to the current passing through the resistor multiplied by the resistance value. By selecting different resistor values, different levels of current limiting can be achieved. The FMP200JB-52-2R2 is also designed to be able to handle a large amount of power. With a voltage rating up to 200 Volts, it can handle a large amount of current with minimal heat generation. This makes it ideal for use in areas where a large current is required but the amount of heat generated needs to be limited.

Conclusion

The FMP200JB-52-2R2 is a popular through hole resistor, which has a wide range of applications. It is used in I/O circuitry, power supplies, and as a switch, due to its current-limiting capability. The resistor has a low resistance value, which helps regulate the current flow in circuits and helps protect components from damage. Its ability to handle high power and voltages makes it ideal for use in many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description