FMP300FRF73-383R

Series:	FMP
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	383 Ohms
Tolerance:	±1%
Power (Watts):	3W
Composition:	Metal Film
Features:	Flame Proof, Safety
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.197" Dia x 0.610" L (5.00mm x 15.50mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: FMP300FRF73-383R Application Field and Working PrincipleThrough hole resistors are components made to dissipate electricity and they provide a way of controlling electric current. This type of resistor is so named because it goes through a hole in a printed circuit board or part of a component (like a transistor) before being soldered into place. FMP300FRF73-383R is a through hole resistor with a wide range of applications. This article will discuss the application field and working principle of FMP300FRF73-383R.The application field of FMP300FRF73-383R is mainly in fields which require a certain level of current maintaining. In telecommunications, they are used to reduce signal input and provide voltage regulation. This type of through hole resistor can also be found in automotive systems where they are utilized for voltage and current stabilization. FMP300FRF73-383R\'s finds use in the field of avionics, as a current regulator for certain motors; and in audio equipment, allowing equipment to run at a certain level of amplification. Besides these areas, through hole resistors such as FMP300FRF73-383R are widely employed in industrial electronics and home appliances. The working principle of FMP300FRF73-383R is based on the Ohm\'s Law. The resistance of conductor is inversely proportional to the current passing through it. In the case of FMP300FRF73-383R, the resistance is associated with the number of strands or the length of the resistor. The more strands/longer resistor, the higher the resistance of the resistor. It follows that the current through the resistor is inversely proportional to the resistance or the number of strands. To further illustrate this working principle, let\'s say we have a FMP300FRF73-383R with a 50 ohms resistance and a DC power source of 12v. According to Ohm\'s law, the current can be calculated by using the formula I=V/R, so the current passing through the resistor in this case would be (12v/50 ohms) = 240mA. To calculate the power dissipated by the FMP300FRF73-383R, the power formula of P=I*V can be used. Therefore the power would be (240mA*12v) = 2.88W. This power dissipated by the FMP300FRF73-383R is important to take into consideration while selecting a resistor for particular application. Too much power will damage the resistor, however too little power won\'t be sufficient for an optimal performance.Another factor to consider while selecting FMP300FRF73-383R is its tolerance level. As the resistor\'s resistance is not an exact measurable Quantity, resistor manufacturers usually provide a certain measure of tolerance level. Tolerance level defines how much resistance can be considered as acceptable. Different resistors will have different tolerance levels. For example, FMP300FRF73-383R invasions come with a 10% tolerance, meaning that the resistor could be up to 10% weaker or stronger than the specified resistance (in this case, the maximum resistance could be 55 ohms whereas the minimum resistance could be 45 ohms).In conclusion, FMP300FRF73-383R is a versatile through hole resistor that can be used for a wide range of applications. It is important to consider its resistance, power rating and tolerance level when selecting a resistor for particular applications. This will ensure that the resistor performs optimally and does not incur damage due to excessive current.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description