Series:	FN 2090
Part Status:	Active
Filter Type:	Single Phase
Configuration:	Two Stage
Voltage - Rated DC:	--
Voltage - Rated AC:	110V, 250V
Current:	16A
Frequency - Operating:	DC ~ 400Hz
Applications:	General Purpose
Approvals:	CE, CSA, ENEC, UR
Operating Temperature:	-20°C ~ 100°C
Mounting Type:	Chassis Mount
Termination Style:	Quick Connect
Inductance:	4mH

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

FN2090-16-06 is a power line filter module (PLFM) from Bourns. It provides an effective solution for applications where electrical noise generated by EMI (electromagnetic interference) must be filtered and still meets the respective legal requirements and standards. The devices are available either in a flat-pack configuration or as a module utilizing a molded clip.

Working Principle

The working principle of FN2090-16-06 is based on the filtering effect that is achieved through the use of capacitors, inductors and ferrite beads. These components are arranged in a particular topology that allows the module to provide an effective EMI filtering solution.The inductors and capacitors of the module are connected in series, forming a filter network. This filter network is designed to block out noise frequencies above the cutoff frequency while allowing frequencies below the cutoff frequency to pass through the module. The ferrite beads are also connected in series to the filter network. These are used to absorb any noise generated by the module and therefore ensure that the noise generated by the module is as low as possible.

Application Field

FN2090-16-06 can be used in a variety of applications such as industrial, automotive, medical, consumer electronics, telecom, and networking applications. It is suitable for use in EMI sensitive applications due to its high common mode and differential mode attenuation over a wide frequency range.In industrial applications, the module can be used for suppressing noise generated by DC-DC converters, frequency converters, controllers and other motor-driven equipment.It is also suitable for automotive applications where the module can be used to suppress the high-frequency noise generated by ECUs and sensors.In medical applications, the module can be used in pacemakers, infusion pumps, and other medical equipment for EMI suppression.In consumer electronics, the module can be used to suppress noise generated by display units, TVs, radios, and other devices.Finally, the module can be used in telecom and networking applications such as switches, routers, and access points to provide effective EMI suppression.

Conclusion

In conclusion, the FN2090-16-06 is a power line filter module that is designed to provide effective EMI filtering solutions for a variety of applications. It can be used in industrial, automotive, medical, consumer electronics, telecom and networking applications due to its highly effective common mode and differential mode attenuation over a wide frequency range. It is an ideal choice for applications where noise generated by EMI must be filtered and still comply with the respective legal requirements and standards.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description