FN3310-400-99-R5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The FN3310-400-99-R5 is a power line filter module developed for the purpose of reducing electrical noise from industrial processes and equipment. It is equipped to control both common and differential modes of interference. The module has four input pins corresponding to a 10A power supply, two +ve and two -ve terminal connections. These connections are connected to aluminium oxide capacitors with the negative terminal connected to the ground.

The FN3310-400-99-R5 is fitted with two 10A and one 5A inductors which are connected the +ve and -ve terminals corresponding to the positive and negative power supplies. The inductor is enclosed in a plastic housing which provides electrical insulation. The inductors act as high-pass filters which filter out the high-frequency noise and allow only the low-frequency signals to pass through. The inductors are also equipped with a thermal cutoff switch which cuts off the current flow from the inductor in case of excessive current or voltage.

The FN3310-400-99-R5 module also features two parallel diodes connected to the +ve and -ve terminals. The parallel diodes are responsible for reducing common mode and differential mode interference. When the voltage at the source end is greater than the voltage at the load end, the diode becomes forward biased and allows the current to flow from the source to the load. Conversely, when the voltage at the source end is lower than the voltage at the load end, the diode becomes reverse biased and blocks any current from flowing from the source to the load. Thus, the diodes act as a rectifier and filter out the high-frequency noise from the AC power line.

To sum up, the FN3310-400-99-R5 power line filter module is used for reducing electrical noise from industrial processes and equipment. It has four input pins corresponding to a 10A power supply, two +ve and two -ve terminal connections. It also features two 10A and one 5A inductors which are connected to the +ve and -ve terminals corresponding to the positive and negative power supplies. The inductors act as high-pass filters which filter out the high-frequency noise and allow only the low-frequency signals to pass through. The module also features two parallel diodes connected to the +ve and -ve terminals which reduce common mode and differential mode interference. This makes the FN3310-400-99-R5 an effective power line filter module for industrial applications.

The specific data is subject to PDF, and the above content is for reference