FNQ-R-30

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

FNQ-R-30 is an electrical specialty fuse, designed to provide quick and reliable circuit protection. This fuse is considered to be a one-time fuse, meaning it must be replaced after it has blown. The FNQ-R-30, like most fuses, consists of two metal pieces, a body and an internal element. The FNQ-R-30 fuse is designed for use in branch circuits that are 25 to 600 Amps. It has energy limiting characteristics to protect smaller motors, transformers, and capacitors.

The FNQ-R-30 consists of two parts, the body and the element. The body is usually made from vitreous china, ceramic or polycarbonate and acts as an enclosure for the fuse element. The enclosure has two threaded posts to accept the fuse element. It also has a mounting lug to attach to a panel, a bracket, or other supporting structure.

The element is the heart of the FNQ-R-30 fuse. It consists of a metal strip or wire, wound into a semicircular shape. This element is held in place by two threaded posts. When the current passing through the fuse reaches a certain point, the heat generated from the current melts the metal strip and causes it to open, thus breaking the circuit and protecting it from further damage.

The FNQ-R-30 also has a low ampere interrupt rating (IR), which is usually around one amp. This ensures that the fuse will open very quickly when the current reaches a certain threshold. This low IR also helps to protect the components connected to the fuse from being damaged by high levels of current.

The FNQ-R-30 is very popular due to its low cost and small size. It also has a high voltage rating, which allows it to be used in a wide variety of applications. It is especially useful for protecting smaller devices such as laptops, printers, and other electronics, as well as for use in power strips, circuit breakers, and other components in larger systems.

The FNQ-R-30 offers both overcurrent and short circuit protection. The fuse has a melting element that senses when the current has exceeded its maximum level. When this happens, the fuse will open and cut off the power supply to the device. It will then remain open until the current drops below its rating, at which time it will reset itself and allow current to pass once again.

The FNQ-R-30 is a very reliable circuit protection device and is used widely in both residential and commercial applications. It has a number of advantages over other types of circuit protection, such as being easy to install, being very cost-effective, and being able to provide reliable protection. It also has few disadvantages, such as its one-time fuse requirement, which means it must be replaced after it has blown.

The specific data is subject to PDF, and the above content is for reference