FNQ-R-7-1/2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

FNQ-R-7-1/2 application field and working principle

FNQ-R-7-1/2 fuses are an electrical component and fall under the category of specialty fuses. They are used for applications where the rated current is 7.5A and below. These fuses are typically used to protect electrical circuits and devices.

FNQ-R-7-1/2 fuse is an electrical safety device that works by breaking an electrical circuit during an overcurrent condition. It “breaks” the circuit by interrupting the current flow during an overload or short circuit condition. In normal conditions, the fuse element passes a fixed amount of current set by its rating. But when the current within the circuit exceeds this rating, the element melts to discontinue the current. In this way, the fuse greatly reduces the possibility of fire accidents due to excessive current flow.

FNQ-R-7-1/2 fuse consists of two plastic end caps and a metal strip. The metal strip is enclosed in the body of the fuse. This metal strip is known as an element and is the most important component of the fuse. When the current passing through the circuit increases beyond its rated value, the element melts. This interrupts the current flow, preventing any further damage to the circuit.

In addition to protecting circuits, FNQ-R-7-1/2 fuse typically provide overload protection for motor windings, motors, lighting systems, heating systems, and air conditioning systems. In some applications, a motor starter with a built-in overload device is used with a fuse, typically in combination with a contactor. This provides increased protection for the motor, as the overload device can take action before the fuse is activated.

It is important to note that when using FNQ-R-7-1/2 fuses, they should be selected based on the application, as they are available in a variety of ratings. The selection of the right rating is essential to ensure proper protection for the circuit, and should be done in accordance with local electrical codes. Improper sizing can result in either too little protection, or the fuse blowing under normal conditions.

When using FNQ-R-7-1/2 fuses for any application, caution is always recommended, as overcurrent can cause wire, equipment, or component damage. It is also important to consider clearance and spacing requirements set by the local electrical code when installing the fuses.

In conclusion, FNQ-R-7-1/2 fuses are a specialty fuse used to protect equipment and circuits from overcurrent conditions. They are available in a variety of ratings, and must be selected based on the application. Installing these fuses properly with their proper ratings can provide the ultimate protection against overcurrent conditions.

The specific data is subject to PDF, and the above content is for reference