Allicdata Part #: | FS10-5-ND |
Manufacturer Part#: |
FS-010CBE5R000JE |
Price: | $ 1.69 |
Product Category: | Resistors |
Manufacturer: | Vishay Huntington Electric Inc. |
Short Description: | RES 5.0 OHM 10W 5% WW RAD |
More Detail: | 5 Ohms ±5% 10W Through Hole Resistor Radial Wirew... |
DataSheet: | FS-010CBE5R000JE Datasheet/PDF |
Quantity: | 1000 |
100 +: | $ 1.53562 |
Series: | FS |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 5 Ohms |
Tolerance: | ±5% |
Power (Watts): | 10W |
Composition: | Wirewound |
Features: | -- |
Temperature Coefficient: | ±400ppm/°C |
Operating Temperature: | -55°C ~ 350°C |
Package / Case: | Radial |
Supplier Device Package: | -- |
Size / Dimension: | 0.313" Dia x 1.750" L (7.94mm x 44.45mm) |
Height - Seated (Max): | 0.600" (15.24mm) |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction to Through Hole Resistors
Through hole resistors are passive electronic components that are used in helping to control the amount of current in a circuit while at the same time seeking to maintain a constant voltage. In order for these components to work effectively, they must have certain characteristics such as resistance, capability to withstand some power, maximum voltage, and temperature coefficient.
Types of Through-Hole Resistors
Through hole resistors come in many different formats with widely varying characteristics, so it is important to know what type you need and the capabilities it will require. Some of the main types of through hole resistors are carbon composition, metal oxide, and surface mount.;
- Carbon Composition - These resistors are made up of a mixture of carbon pressed into a cylindrical shape surrounded by a ceramic core. They have a low cost and a wide range of power handling capabilities, but their main drawback is they are not very accurate.
- Metal Oxide - These resistors are composed of a metal oxide material which is sealed in a metal casing. They are typically more accurate than carbon composition resistors but they have a limited power handling capacity.
- Surface Mount - Surface mount resistors are smaller and thinner than standard through hole resistors, allowing them to be mounted on a printed circuit board without the need for soldering. These resistors have a wide power handling capacity, but they do not require a lot of space.
FS-010CBE5R000JE Application Field and Working Principle
The FS-010CBE5R000JE through hole resistor falls into the Surface Mount category for Resistors. This Resistor is capable of Constant Current Impedance, which means that this resistor will provide a constant current in the circuit regardless of the voltage level. It is also designed with a Voltage Dependent Impedance, which means that it will automatically adjust the resistance value to stabilize the current in the circuit.
This resistor has a wide range of applications such as power management, current limiting, and protection. In power management applications, the resistor can be used to effectively regulate the amount of current that is passing through the system by changing the voltage. This resistor can also be used in current limiting applications to protect sensitive components from too much current. It can also be used in protection applications to provide the needed protection against excessive current.
The FS-010CBE5R000JE resistor is made up of a thinned film material which helps to increase its power handling capability along with its accuracy. The surface mount design helps to provide increased flexibility of installation and also helps to reduce the amount of noise interference that can be caused by other components in the circuit.
The working principle of the FS-010CBE5R000JE resistor is that it utilizes a special type of resistor material which enables it to provide both Constant Current Impedance and Voltage Dependent Impedance in order to regulate and stabilize the current in the circuit. As the current and voltage levels change, this resistor will automatically adjust its resistance value to ensure a constant current in the circuit.
Conclusion
Through Hole Resistors are a type of passive electronic component which help to control and maintain constant current levels in a circuit. The FS-010CBE5R000JE is a through hole resistor that is capable of Constant Current Impedance and Voltage Dependant Impedance in order to regulate and protect the circuit. It has a wide range of applications such as power management, current limiting, and protection.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...