FSOT2011E1R000KE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

• FSOT2011E1R000KE Application Field and Working Principle
• Introduction to Chassis Mount Resistors
• General Definition: Chassis mount resistors are designed to provide electrical resistance inside of an enclosure. They are mounted in the walls of the chassis, such as with standoffs, and typically used to limit the amount of current passing through a circuit. Chassis mount resistors may also be used to tune circuit parameters, such as gain, by providing a known resistance across a circuit.
• Types: The most common type of chassis mount resistor is a chip resistor. This type of resistor is typically made from heated glass tubing with a ceramic core, which is then painted with a silver compound to give it its distinct insulating ability. Other types of resistors such as wire wound resistors or thin film resistors can also be used to provide an adjustable resistance.
• Installation: Chassis mount resistors are installed in the walls of a chassis by soldering or by using a screw terminal, depending on the type of resistor used. Once installed, they can then be connected to the rest of the circuit directly, or used as part of a larger network, such as a Wheatstone bridge or a charge pump circuit.
• FSOT2011E1R000KE Application Field and Working Principle
• Application Field: The FSOT2011E1R000KE chassis mount resistor is used in a variety of electronics applications, including automotive, industrial, and consumer electronics. It is typically used to provide a resistance value between 500 ohms and 1.00 K ohms, although resistance values outside of this range are also available. This type of resistor is typically used to limit current in a circuit, or as part of a larger network such as a Wheatstone bridge.
• Working Principle: The FSOT2011E1R000KE chassis mount resistor is a thin film resistor that is made from a ceramic core with a silver compound coating. When current passes through the resistor, the silver compound coating is heated and increases in resistance as more current is applied. This resistance then limits the amount of current that can pass through the resistor, thus preventing circuit overload.
• Conclusion
• The FSOT2011E1R000KE chassis mount resistor is a thin film resistor that is used in a variety of electronics applications, typically used to limit current in a circuit. It is composed of a ceramic core with a silver compound coating, which when heated increases in resistance, thereby limiting the amount of current that can pass through the resistor and preventing circuit overload.

The specific data is subject to PDF, and the above content is for reference