FTA-150-104-H

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Line Filter Modules leverage a broad range of technologies and components to reduce the noise emitted from an alternating current (AC) source. The purpose of these modules is to ensure the stability of the power supply to the system, preventing any kind of spurious signals from being introduced into the system. They can also be used to provide a measure of protection against power line surges and to minimize electromagnetic interference (EMI) emitted from the system. The FTA-150-104-H is one such Power Line Filter Module.

The FTA-150-104-H is a high-efficiency, three-phase filter which is designed to replace more traditional tapped filters. This high-efficiency module provides 109 dB of EMI filtering from 150 kHz to 4 MHz. It includes two stages of differential-mode filtering and one stage of common-mode filtering. The differential-mode filtering is up to 110 dB of isolation between the line to ground and line to line, while the common-mode filtering is up to 40 dB of isolation at 4 MHz. Additionally, it provides an extremely low insertion loss of 0.016 dB at 4 kHz.

The FTA-150-104-H has an operating temperature range of -55 to 105 degrees Celsius and a dielectric strength rating of 1500 volts, which allows it to be used safely in high-voltage applications. The module is composed of aluminum alloy and can be mounted either on a DIN rail or on a PCB. It includes two M12 connectors, four screws and four clamps for efficient installation. It is also RoHS and UL approved, making it suitable for a wide range of applications.

The working principle of the FTA-150-104-H Power Line Filter Module involves the use of capacitors, resistors and inductors to form a low-pass filter. The module is able to filter out the high-frequency noise from the power supply, allowing only the low-frequency signals to pass through. This reduces the amount of EMI produced by the system, providing a more reliable and stable power supply. Additionally, it provides surge protection, protecting the system from power line surges and minimizing the risk of equipment damage and data loss.

The FTA-150-104-H Power Line Filter Module is an efficient and reliable way to reduce EMI contamination from AC sources. Its high-efficiency design, combined with its surge protection capabilities, make it an ideal solution for a variety of applications. It is easily installed and provides a reliable power supply for both industrial and commercial systems.

The specific data is subject to PDF, and the above content is for reference