FTA-150-104-S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Line Filter Modules are modules which are used to reduce interference which is transferred through electrical power lines. This is achieved by filtering out frequencies which are not within the nominal bandwidth of the module. The FTA-150-104-S is a filter module designed to filter out frequencies in the range of 150 kHz to 104 MHz.

The FTA-150-104-S is a low-pass filter module, meaning it allows frequencies below the Nominal Cut-Off Frequency to pass at its rated voltage and attenuates frequencies above it. The module\'s nominal cut-off frequency is 150 kHz, meaning frequency components above 150 kHz will be attenuated. As the frequency increases, the voltage will decrease. The module has a maximum rated voltage of 100 VDC. This voltage rating ensures that the module does not saturate under normal operating conditions.

The working principle of the FTA-150-104-S is based on the principle of inductive-capacitive (LC) filtering. It consists of a series of inductors and capacitors with each component providing frequency-dependent impedance. The capacitors remove higher frequency components, and the inductors attenuate higher frequency components. To further reduce the higher frequency components, the module also contains additional choke coils and ferrite beads. This combination of components ensures that the high frequency components are eliminated, while lower frequency components pass through without any distortion.

The module\'s design also includes additional protection features such as transient voltage suppression and surge protection. The transient suppression feature helps to absorb voltage spikes while the surge protection feature protects against damaging levels of current. This ensures protection of the module as well as the system connected to it.

The FTA-150-104-S is an ideal choice for many applications that require low-pass filtering of signals in the frequency range of 150 kHz to 104 MHz. These applications include radio and television receivers, data transmission systems, remote control systems, navigation systems, and communication systems. The module\'s wide range of features makes it a great choice for any application where high-frequency noise needs to be filtered and attenuated.

In summary, the FTA-150-104-S is a power line filter module that is designed to filter out frequencies in the range of 150 kHz to 104 MHz. It is a low-pass filter module that functions based on the principle of inductive-capacitive (LC) filtering. This module has many features such as transient voltage suppression, surge protection, and additional choke coils and ferrite beads which ensure that high frequency components are eliminated and lower frequency components pass through without any distortion. The module is suitable for a wide range of applications including radio and television receivers, data transmission systems, remote control systems, navigation systems, and communication systems.

The specific data is subject to PDF, and the above content is for reference