FVTS10R1E25R00JE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Chassis Mount Resistors are a type of resistor used for regulating conductance in a circuit. Among them, FVTS10R1E25R00JE is a product of a series of axial leaded metal oxide small signal resistors, which are characterized by small size, high power rating, fast thermal response and good concentration of resistor element and terminals. In this article, the applications and the work principle of FVTS10R1E25R00JE will be discussed respectively.

Applications
FVTS10R1E25R00JE is primarily designed for LED lighting applications, signal routing, and general purpose switching circuits. It is also suited for voltage-controlled oscillators, RF amplifiers, mixers, and filters. It can be specifically used in VDDD circuits. The FVTS10R1E25R00JE exhibits excellent performance in both Voltage Noise and Transient Registration. It can also be used in a variety of applications such as general illumination, infrared detection, and motion sensing circuits. Due to its small size, FVTS10R1E25R00JE can be used in slimming applications like cellular phones and small space applications.
In addition, the FVTS10R1E25R00JE can be used in high-frequency switching circuits such as those found in transistor radio receivers. It has an excellent temperature tracking and fast recovery time in transient conditions as well as low thermal resistance for better heat management. The FVTS10R1E25R00JE also has good frequency response even at higher frequencies. It can be used over a wide temperature range due to its low temperature coefficient.

Working Principle
The working principle of FVTS10R1E25R00JE is based on Ohm\'s Law. That is, the current flowing through a resistor is inversely proportional to the resistance of that resistor. The FVTS10R1E25R00JE is made of a metal-oxide layer that is sandwiched between two layers of metal plates. This combination forms an effective barrier against current flow. The metal oxide layer acts as the resistive element. The combination of the metal plates and the metal-oxide layer creates a positive temperature coefficient (TC) and a negative temperature coefficient (NTC) of resistance.
The FVTS10R1E25R00JE is also designed to act as a voltage divider. A voltage divider is an electronic device that regulates the amount of voltage that passes through a circuit by using two resistors of different values. When a voltage is applied to the two resistors, the current is divided between them based on their relative resistance values, resulting in the desired output voltage.

The FVTS10R1E25R00JE is also designed to work with other components in a circuit. For example, it can be used in conjunction with capacitors and inductors to limit the amount of current flowing through the circuit. This will ensure that the desired voltage will be maintained throughout the circuit and that additional noise and interference will not affect its performance. The FVTS10R1E25R00JE can also be used with transistors to control the gain of an amplifier.

In conclusion, FVTS10R1E25R00JE is a type of Chassis Mount Resistor that is primarily designed for LED lighting applications, signal routing, and general purpose switching circuits. Its working principle is based on Ohm\'s Law, and it can be used with a variety of other components such as capacitors, inductors, and transistors to regulate the amount of voltage passing through a circuit. FVTS10R1E25R00JE exhibits excellent performance in both Voltage Noise and Transient Registration. Additionally, its small size makes it ideal for slimming applications like cellular phones and small space applications.

The specific data is subject to PDF, and the above content is for reference