FW.91.TNC.M

VSWR:	--
Applications:	GSM
Height (Max):	10.039" (255.00mm)
Mounting Type:	Connector Mount
Ingress Protection:	IP67
Termination:	Connector, TNC Male
Features:	--
Gain:	3dBi, 4.5dBi
Return Loss:	--
Series:	--
Number of Bands:	2
Antenna Type:	Whip, Straight
Frequency Range:	824MHz ~ 960MHz, 1.71GHz ~ 2.17GHz
Frequency (Center/Band):	892MHz, 1.9GHz
Frequency Group:	UHF (300 MHz ~ 1 GHz), UHF (1 GHz ~ 2 GHz)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p><strong>Introduction</strong></p><p>FW.91.TNC.M is a type of RF antenna that is designed for use in a wide variety of applications. It is a coaxial type antenna that has a metal body with a closed loop feed. The antenna is designed to be used with low frequency signals, which makes it suitable for applications such as Shortwave Radio Reception, Long–Distance RF Communications, and Amateur Radio Transmissions.</p><p><strong>Application Field</strong></p><p>A FW.91.TNC.M antenna is ideal for applications where a low frequency signal needs to be broadcast or received. It can be used for shortwave radio reception, long–distance RF communications, and amateur radio transmissions. This antenna is great for use in ham radio, broadcast engineering, television broadcast, or satellite communications. It can even be used for low power microwave communications.</p><p>This antenna is also well–suited for applications where there is a need to minimize interfering noise. FW.91.TNC.M antennas are designed with a low band–width, which helps to reduce interference from other sources. This makes it ideal for applications such as medical and industrial imaging, as well as for biometric applications.</p><p><strong>Working Principle</strong></p><p>The basic principle of operation for a FW.91.TNC.M antenna is the same as any other type of antenna. It operates by converting electromagnetic energy into an electrical signal that can be sent or received. This antenna is built from a metal body, which functions as an antenna conductor. The antenna also has a closed loop feed, which transmits the electric current and converts it into a usable signal.</p><p>The metal body of the antenna serves as the antenna conductor and helps create a Faraday Shield. This shield helps to reduce interference and noise, allowing only the desired signals to pass through. The closed loop feed works in a similar way by transmitting the electric current and converting it into a usable signal. The antenna then radiates the signal in all directions.</p><p>The overall performance of the FW.91.TNC.M antenna depends on its design as well as the environment in which it is used. It is important to consider factors such as the placement of the antenna, the type of signal being transmitted, and the type of environment in which the signal will be traveling.</p><p><strong>Conclusion</strong></p><p>FW.91.TNC.M is an antenna designed for use with low frequency signals. It is well–suited for a wide range of applications, such as shortwave radio reception, long–distance RF communications, and amateur radio transmissions. This antenna is ideal for applications that require a high level of signal purity and minimal interference. The working principle of the antenna is based on converting electromagnetic energy into an electrical signal and radiating it in all directions. The overall performance of the antenna will depend on its design and placement, as well as the environment in which it is used.</p>

The specific data is subject to PDF, and the above content is for reference