FX6-60P-0.8SV1(92)

Series:	FX6
Packaging:	Tape & Reel (TR)
Part Status:	Active
Connector Type:	Header, Outer Shroud Contacts
Number of Positions:	60
Pitch:	0.031" (0.80mm)
Number of Rows:	2
Mounting Type:	Surface Mount
Features:	Board Guide
Contact Finish:	Gold
Contact Finish Thickness:	--
Mated Stacking Heights:	6mm, 8mm
Height Above Board:	0.236" (6.00mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

FX6-60P-0.8SV1(92) Application Field and Working PrincipleThe FX6-60P-0.8SV1(92) is a mezzanine connector, a type of edge-shaped rectangular connector, used to connect two printed circuit boards (PCBs). It has an array of pins for reliable and secure connections and is robust enough to handle even the most demanding applications. Mezzanine connectors offer a range of advantages over other types of connectors, allowing simplified and more reliable connections between components.When using two PCBs, it enables a simpler and less time consuming assembly, such as in applications where two boards must be joined together to complete an overall circuit. As the two boards are physically connected, there is no need for additional wiring. This results in a more efficient and cost-effective solution, especially in large-scale applications.The FX6-60P-0.8SV1(92) is a low-profile connector that is rugged and has a simple design which makes it suitable for both commercial and industrial applications. It is constructed from zinc die-cast housing which offers superior strength and mechanical performance, and a solder-coated tubular terminal that can withstand endangering operating temperatures.The connector has a 2.0mm pitch and 60 pins per linear inch, which gives it a high level of versatility to accommodate different load requirements. The contact finger is 6.00mm long and the coplanarity of the pin is 0.8 mm, making it compatible with a wide range of PCBs. This connector is suitable for both power and signal applications and is approved for use in industrial, transportation, automotive, and consumer electronics.From a mechanical standpoint, the FX6-60P-0.8SV1(92) features a rugged construction that enables high-strength and vibration-resistant performance. It has a quick-release locking system which helps ensure reliable and secure connections and simplified assembly. Additionally, its stainless-steel high-strength housing and terminal snaps provide further protection and ensure that the connection remains secure against vibrations.In terms of electrical properties, the FX6-60P-0.8SV1(92) connector is rated up to 15A and 500V. It has a current rating of more than 6A, which is often adequate for most mezzanine connections. It also has high contact reliability and good electrical insulation. The contact resistance is calculated in ohm-cm and its insulation resistance is tested to be above 100Megohm.The FX6-60P-0.8SV1(92) mezzanine connector is ideal for high-speed signal transmission as well as power connections. It is able to support data transmission up to 16Gb/s. When used together with the mounting hardware, it also provides a ground to prevent signal disconnection even at high temperatures.To sum up, the FX6-60P-0.8SV1(92) is an edge-shaped rectangular connector, designed for use when connecting two printed circuit boards. It is robust enough to handle the most demanding applications and has a range of features that make it suitable for different commercial and industrial applications. It has low-profile construction and a quick-release locking system which ensures secure connections. Additionally, its high current rating and signal transmission speed make it ideal for a variety of purposes.

The specific data is subject to PDF, and the above content is for reference