G100N50W4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are electrical or electronic devices used to reduce the power of a signal without changing other characteristics of the signal. They are mostly used in electronic communication systems. The G100N50W4 is a type of such attenuator that is commonly used in applications such as industrial, automotive and communications systems.

The G100N50W4 attenuator is constructed of a resistor network with two terminals and four resistors. The two terminals signify the input and output, while the four resistors are a combination of two low-value and two high-value resistors, producing a high level of resistance to dissipate unwanted signal energy. The resistors are connected in various combinations, to set different levels of attenuation at different frequencies.

The G100N50W4 attenuator is a wideband design which means it has a uniformly low insertion loss across all wavelengths within its operating range. This design also means the attenuator maintains its integrity regardless of frequency changes. This allows it to attenuate signals ranging from audible tones to radio frequency (RF) signals.

The G100N50W4 attenuator is most commonly used in applications such as telecom, computer networks, RF circuits, and medical equipment. Typical applications include reducing the power of signal transmitters and receivers, preventing signal reflections by loading impedance-matching networks, and providing a stable impedance at any frequency.

The working principle of the G100N50W4 attenuator is relatively simple. When a signal enters the device, the high-resistance resistors reduce the amplitude of the signal. This is done by dissipating some of the signal’s energy as heat. The amount of energy dissipated is determined by the value of the resistor. The higher the resistance, the more energy is dissipated, resulting in a greater level of attenuation.

The G100N50W4 uses the same resistor network to reduce the amplitude of waveform signals. It is designed to attenuate signals regardless of frequency, making it an ideal device for applications that require a consistent level of attenuation at different frequencies. This is why it is the attenuator of choice for many fields, including industrial, automotive, and communications applications.

In conclusion, the G100N50W4 is a type of wideband attenuator with two terminals and four resistors of varying value. It is designed to attenuate signals across a wide range of frequencies and is commonly used in industrial, automotive, and communications applications. The attenuator works by dissipating signal energy using resistance, thus reducing signal amplitude.

The specific data is subject to PDF, and the above content is for reference