Allicdata Part #: | G2A-434A-N1DC100-ND |
Manufacturer Part#: |
G2A-434A-N1 DC100 |
Price: | $ 0.00 |
Product Category: | Relays |
Manufacturer: | Omron Automation and Safety |
Short Description: | RELAY GENERAL PURPOSE |
More Detail: | Relay |
DataSheet: | G2A-434A-N1 DC100 Datasheet/PDF |
Quantity: | 1000 |
0 +: | $ 0.00000 |
Series: | * |
Part Status: | Preliminary |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The G2A-434A-N1 DC100 is a signal relay that is used for a variety of applications. These signal relays are typically used in the field of electronics and telecommunications. They are capable of handling up to 2 Amps and have a current sensitivity of 0.5 mA. This makes them ideal for controlling low power signals.
The primary use case of the G2A-434A-N1 DC100 is to provide a switch between two electrical circuits. This is usually done when a signal needs to be sent from one circuit to another, or between two different devices. When a signal is sent from one circuit to another, the relay switches open, allowing the signal to pass from one circuit to the other. When the signal is no longer needed, the relay switches close, preventing the signal from passing back to the original circuit.
The G2A-434A-N1 DC100 is able to provide this switching action with a few milliamps of current flowing through it. This low current requirement makes it suitable for use in a variety of applications, ranging from computers to alarm systems. It is also able to control a variety of different signals, including digital, analog, and RF signals.
On the inside, the G2A-434A-N1 DC100 contains a small circuit board that contains two transistors and a few capacitors. The transistors control the flow of current from one side of the relay to the other. When a signal is applied, the transistors open, allowing the signal to pass through the relay. This action is responsible for the switching of the relay. The capacitors are used to store energy, allowing the relay to remain in an off state for a longer period of time.
The G2A-434A-N1 DC100 is available in a variety of configurations, allowing it to be adapted to different applications. For example, a resistive coil variant is available, which requires a small amount of current to actuate the relay. A non-resistive variant is also available, allowing the G2A-434A-N1 DC100 to be actuated without using any current.
The G2A-434A-N1 DC100 is a reliable and versatile signal relay. It is suitable for a variety of applications due to its low current requirement and ability to handle a variety of signals. It is also available in a variety of configurations, allowing it to be adapted to different use cases. With these features, the G2A-434A-N1 DC100 is an ideal choice for controlling low power signals.
The specific data is subject to PDF, and the above content is for reference
RELAY GENERAL PURPOSERelay
RELAY TELECOM DPDT 1A 24VTelecom Relay D...
RELAY GENERAL PURPOSE DPDT 1A 3VGeneral ...
RELAY GEN PURPOSE DPDT 1A 4.5VGeneral Pu...
RELAY TELECOM DPDT 2A 3VTelecom Relay DP...
RELAY GENERAL PURPOSE 4PDT 2A 3VGeneral ...