G2A-4L32A-AC24

Turn On Voltage (Max):	19.2 VAC
Coil Resistance:	136 Ohms
Coil Power:	1.4 VA
Contact Material:	Silver Palladium (AgPd), Gold (Au)
Operating Temperature:	-10°C ~ 40°C
Termination Style:	Plug In
Mounting Type:	Socketable
Features:	--
Release Time:	15ms
Operate Time:	15ms
Turn Off Voltage (Min):	7.2 VAC
Series:	G2A
Switching Voltage:	250VAC, 125VDC - Max
Contact Rating (Current):	500mA
Contact Form:	4PDT (4 Form C)
Coil Voltage:	24VAC
Coil Current:	58.0mA
Coil Type:	Non Latching
Relay Type:	General Purpose
Part Status:	Obsolete
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The G2A-4L32A-AC24 is a signal relay designed for applications from 0 to 2 Amps. This product offers an excellent cost-performance ratio by combining reliable performance, quality and cost of production. It is capable of working in a wide variety of signal relay applications, such as general signal relay applications, residential/building automation, security systems, HVAC systems, home automation and lighting control.

Application field

The G2A-4L32A-AC24 is ideally suited for applications that require a reliable signal relay, such as general signal relay applications, residential/building automation, security systems, HVAC systems, home automation and lighting control. It is also suitable for applications in which long lifetime and low failure rate are important. This product offers a great cost/performance combination for applications in a broad range of industries and applications.

Working Principle

The G2A-4L32A-AC24 has a solid-state relay design and operates on a Transient Voltage Suppression (TVS) technique. This advanced technology allows the product to operate on low voltages, from as low as 2V up to 2 Amps. This two-pole, three-wire relay operates with the utmost of reliability, as it utilizes a diode bridge circuit at the input, a relay coil, and a resistor at the output.The diode bridge circuit is responsible for rectifying AC input signals to ensure clean and accurate signal switching. The relay coil is responsible for energizing or de-energizing the internal relay in order to switch the signal on or off. Finally, the resistor prevents overcurrent by limiting the amount of current that can flow through the internal relay.

Conclusion

The G2A-4L32A-AC24 is a signal relay designed for applications from 0 to 2 Amps. It is capable of working in a wide variety of signal relay applications, such as general signal relay applications, residential/building automation, security systems, HVAC systems, home automation and lighting control. It features a solid-state relay design and operates on a Transient Voltage Suppression (TVS) technique, which allows it to operate on low voltages from as low as 2V up to 2 Amps. This product offers a great cost/performance combination for applications in a broad range of industries and applications, and is ideally suited for applications that require a reliable signal relay.

The specific data is subject to PDF, and the above content is for reference