Allicdata Part #: | G6A-434P-ST20-USDC3-ND |
Manufacturer Part#: |
G6A-434P-ST20-US DC3 |
Price: | $ 0.00 |
Product Category: | Relays |
Manufacturer: | Omron Electronics Inc-EMC Div |
Short Description: | RELAY GENERAL PURPOSE 4PDT 1A 3V |
More Detail: | General Purpose Relay 4PDT (4 Form C) Through Hole |
DataSheet: | G6A-434P-ST20-US DC3 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Turn On Voltage (Max): | 2.1 VDC |
Coil Resistance: | 45 Ohms |
Coil Power: | 200 mW |
Contact Material: | Silver Palladium (AgPd), Gold (Au) |
Operating Temperature: | -40°C ~ 70°C |
Termination Style: | PC Pin |
Mounting Type: | Through Hole |
Features: | -- |
Release Time: | 5ms |
Operate Time: | 7ms |
Turn Off Voltage (Min): | 0.3 VDC |
Series: | G6A |
Switching Voltage: | 250VAC, 220VDC - Max |
Contact Rating (Current): | 1A |
Contact Form: | 4PDT (4 Form C) |
Coil Voltage: | 3VDC |
Coil Current: | 66.7mA |
Coil Type: | Non Latching |
Relay Type: | General Purpose |
Part Status: | Obsolete |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The G6A-434P-ST20-US DC3 signal relay is a type of electrical switching device used to transform electrical signals into a variety of different types, such as required by a signal circuit. As a stand-alone device, it is designed to be integrated as part of a signal control system. It has a maximum switching current of 2 amperes and can provide various forms of signal control, such as ON/OFF, pulse or latch control.
The relay consists of a power connector, contactor, arc suppression diode, and solid state relay (SSR). The power connector provides the required electrical power to the relay. Its current carrying capacity is determined by the relay rating. The contactor collects all the signals and controls the relay operation. The arc suppression diode provides protection against current overloading due to indirect switching arc. The SSR acts as the switching device, allowing the relay to be turned ON or OFF with the applied signal.
When a signal applied to the relay, the SSR is activated and the power is sent to the contactor. The contactor changes its position and the relay is energized. Depending on the type of relay, the contactor can open and close the circuit either in a momentary or in a latching configuration. In the case of momentary contact, the relay will be triggered only as long as the power is applied to it. In the case of latch mode, the relay will hold the state, even after the power is turned off.
The G6A-434P-ST20-US DC3 signal relay is designed for reliable operation in a variety of different environments, such as consumer appliances, HVAC, security systems, automotive applications, etc. Its wide operating temperature range of -20 to 100°C can enable a wide range of applications, such as high temperature or low voltage operations. It is a self-latching relay, meaning that it will remain in the selected state, even after the power is disconnected. Moreover, it is designed with surge protection to ensure the protection of the connected equipment in the event of an unexpected power surge.
In summary, the G6A-434P-ST20-US DC3 signal relay is a versatile switching device designed for reliable operation in a variety of different applications. With a current rating of 2 amperes and a wide operating temperature range of -20 to 100°C, it is suitable for applications in consumer appliances, HVAC, security systems, automotive applications, and more. It is designed with arc suppression, surge protection, and self-latching features to ensure reliable operation and safety in its intended application.
The specific data is subject to PDF, and the above content is for reference
RELAY GENERAL PURPOSERelay
RELAY TELECOM DPDT 1A 24VTelecom Relay D...
RELAY GENERAL PURPOSE DPDT 1A 3VGeneral ...
RELAY GEN PURPOSE DPDT 1A 4.5VGeneral Pu...
RELAY TELECOM DPDT 2A 3VTelecom Relay DP...
RELAY GENERAL PURPOSE 4PDT 2A 3VGeneral ...