Allicdata Part #: | G6A-434PST20USDC5-ND |
Manufacturer Part#: |
G6A-434P-ST20-US-DC5 |
Price: | $ 0.00 |
Product Category: | Relays |
Manufacturer: | Omron Electronics Inc-EMC Div |
Short Description: | RELAY GENERAL PURPOSE 4PDT 1A 5V |
More Detail: | General Purpose Relay 4PDT (4 Form C) Through Hole |
DataSheet: | G6A-434P-ST20-US-DC5 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Turn On Voltage (Max): | 3.5 VDC |
Coil Resistance: | 125 Ohms |
Coil Power: | 200 mW |
Contact Material: | Silver Palladium (AgPd), Gold (Au) |
Operating Temperature: | -40°C ~ 70°C |
Termination Style: | PC Pin |
Mounting Type: | Through Hole |
Features: | -- |
Release Time: | 5ms |
Operate Time: | 7ms |
Turn Off Voltage (Min): | 0.5 VDC |
Series: | G6A |
Switching Voltage: | 250VAC, 220VDC - Max |
Contact Rating (Current): | 1A |
Contact Form: | 4PDT (4 Form C) |
Coil Voltage: | 5VDC |
Coil Current: | 40.0mA |
Coil Type: | Non Latching |
Relay Type: | General Purpose |
Part Status: | Obsolete |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The G6A-434P-ST20-US-DC5 is a signal relay used for applications that require a controlling voltage that is much lower than the load voltage. This makes it perfect for use in dividing circuits, signal conversion, and amplification of the weak input signals which is extremely disturbed due to the load.
The G6A-434P-ST20-US-DC5 has a signal capacity of up to 2 Amps. As such, it is suitable for applications that require a low-amperage signal control. For example, it can be used in servo motors, where the relay can be used to control the small electrical signals required to control the position of the servo motor. As such, they are often used for precise control applications.
When it comes to the G6A-434P-ST20-US-DC5\'s working principle, it relies on the classic electromagnetic relay design. In this design, the relay has an electromagnet and an armature which are connected to a wiper contact. When the electromagnet is energized, it attracts the armature which, in turn, moves the wiper contact and completes the circuit. This design allows the relay to switch from its normally open position to its normally closed position when a current is supplied to the electromagnet, as it can pull the armature and contact into the position that will complete the circuit.
For the G6A-434P-ST20-US-DC5, this design is especially suitable as it can be used in low amperage signal circuits. This is because the armature and contact can move quickly and easily when the current is applied, allowing it to switch between the two positions with minimal resistance. This makes it ideal for controlling signals in sensitive circuits, as it can accurately detect and respond to small inputs without causing any disruption to the flow of current.
The G6A-434P-ST20-US-DC5 is a reliable and robust device, perfect for a variety of low-amperage applications. Not only can it be used to control signals precisely, but it can also be used to protect circuits from damage due to high amperage by providing a quick and easy way to break the circuit while still allowing for small signals to be passed through. Because of this, it is an invaluable tool for those who need to control and protect sensitive circuits, and is perfect for applications that require precise control and reliable protection from damage.
The specific data is subject to PDF, and the above content is for reference
RELAY GENERAL PURPOSERelay
RELAY TELECOM DPDT 1A 24VTelecom Relay D...
RELAY GENERAL PURPOSE DPDT 1A 3VGeneral ...
RELAY GEN PURPOSE DPDT 1A 4.5VGeneral Pu...
RELAY TELECOM DPDT 2A 3VTelecom Relay DP...
RELAY GENERAL PURPOSE 4PDT 2A 3VGeneral ...