G6A-434P-ST40-US-DC48

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A G6A-434P-ST40-US-DC48 signal relay is a specialized electromechanical switch designed to provide electromagnetic control of a pair of contacts between two terminals. It is used to control power circuits for low-current applications — typically up to 2 amps — in electrical and electronics applications. Depending on the type of application, the relay can be used to control power or signal circuits, or both. Signal relays can be used to automate the switching of substances, including liquids, gases or solids, or to control complicated machinery.

Applications

Signal relays are commonly used to connect and disconnect two distinct circuits, such as an on/off switch for a furnace or to automatically open and close a circuit breaker. Signal relays are also often used to control the flow of current in particular electrical and electronic systems. They can be used to control the operation of high-voltage switching equipment, such as large electrical motor starters, industrial automation systems, and other electrical distribution equipment. Additionally, signal relays are used in dozens of other applications such as measuring devices, electric heating elements, lighting controls, and in factory controls.

Features

Signal relays are typically available with base mountings for either panel or surface mountings. They may also be available in several form factors to meet specific design objectives. The contact arrangements of these relays vary in both quantity and type, including normally closed, normally open, change-over, double-throw and single-throw. Advanced control functions such as latching, timing and logic functions are also available. For example, the G6A-434P-ST40-US-DC48 model offers six 2A contacts arranged in a double-throw configuration (three each of normally closed and normally open). Additionally, this relay offers features including a DC voltage coil, dry or oil-filled construction, and a wide range of operating and mechanical life.

Working principle

A signal relay works by using an electromagnet to mechanically control an electrical switch. An electrical coil is an electromagnet, in which a current passing through a winding causes an electromagnetic field to form inside the coils\' core. When this field is activated, the contacts open or close, depending on the configuration of the switch. If this current is reduced or removed from the coil, the field then dissipates, releasing the contacts and resetting the switch to its normally open or normally closed position.

The operation of signal relays can be further refined with the use of a control signal, as in the G6A-434P-ST40-US-DC48 model, which uses a DC voltage to operate the relay. When the voltage applied is present (typically 12 to 48 volts), the contacts close. The twomain components of a signal relay are its coil and its contacts, which are designed in a wide variety of configurations based on the application.

Signal Relays such as G6A-434P-ST40-US-DC48 offer a wide range of features and functions, making them perfect for many low-current applications. For example, the G6A-434P-ST40-US-DC48 model offers features such as six 2A contacts arranged in a double-throw configuration, and a wide range of operating and mechanical life. Moreover, signal relays are simple, cost-effective solutions for many applications, including those in the electrical, electronics, automation and industrial sectors.

The specific data is subject to PDF, and the above content is for reference