G6A-474P-ST20-US-DC12

Turn On Voltage (Max):	8.4 VDC
Coil Resistance:	720 Ohms
Coil Power:	200 mW
Contact Material:	Silver (Ag), Gold (Au)
Operating Temperature:	-40°C ~ 70°C
Termination Style:	PC Pin
Mounting Type:	Through Hole
Features:	--
Release Time:	5ms
Operate Time:	7ms
Turn Off Voltage (Min):	1.2 VDC
Series:	G6A
Switching Voltage:	250VAC, 220VDC - Max
Contact Rating (Current):	2A
Contact Form:	4PDT (4 Form C)
Coil Voltage:	12VDC
Coil Current:	16.7mA
Coil Type:	Non Latching
Relay Type:	General Purpose
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Signal Relays, Up to 2 Amps

The G6A-474P-ST20-US-DC12 is a signal relay, capable of working with up to 2 amps current. It is a single-pole double-throw (SPDT) device, which means that it is a general purpose switch for controlling electric current flow in a circuit. The module has two input and two output terminals, set in a rectangular plastic body. The module operates by responding to electrical signals on the input, usually from a breadboard or other microcontroller device, and then switching power to the load. In this way, simple logic circuits can be built and programmed in a matter of minutes. The output channels are triggered by a control signal. If the control signal is of an opposite polarity to the input signal, the module will switch to the other branch. This is useful for routing circuit paths. The module is also useful for providing bounce-free operation in switched circuits.The G6A-474P-ST20-US-DC12 signal relay is versatile and can be used in a broad range of applications. It can be used in audio-frequency circuits, such as amplifiers and preamplifiers, for controlling multiple sets of speakers. It can be used in alarm and telephone systems, and in numerous other industrial control applications. The module is small and has a very low power consumption.The working principle of this device is fairly straightforward. When power is supplied to the module\'s input terminals, an electromagnet is energized, creating an electromagnetic field that pushes or pulls a movable contact from one position to the other. This changes the circuit path and, depending on the position of the contact, either routes the circuit path to the output terminals or breaks the connection. When the power to the module is removed, the contact returns to its original position due to the spring force applied to the contact. This simple device is ideal for controlling electric current in signal applications and relays. It can be used in numerous applications, and its small size and low power consumption make it a great choice for any project.

The specific data is subject to PDF, and the above content is for reference