G6Z-1FE-A DC9

Turn On Voltage (Max):	6.75 VDC
Coil Resistance:	405 Ohms
Coil Power:	200 mW
Contact Material:	Copper (Cu), Gold (Au)
Operating Temperature:	-40°C ~ 70°C
Termination Style:	Gull Wing
Mounting Type:	Surface Mount
Features:	Sealed - Fully
Release Time:	10ms
Operate Time:	10ms
Turn Off Voltage (Min):	0.9 VDC
Series:	G6Z
Switching Voltage:	30VAC, 30VDC - Max
Contact Rating (Current):	10mA
Contact Form:	SPDT (1 Form C)
Coil Voltage:	9VDC
Coil Current:	22.2mA
Coil Type:	Non Latching
Part Status:	Obsolete
Lead Free Status / RoHS Status:	--
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

High Frequency (RF) Relays

Relays are electric components that can be used to isolate, control, or switch electric circuits. Relays are typically used to switch higher currents than can be handled by the direct control of an electronic component, and are often employed in a wide variety of consumer and industrial applications. In the industrial sector, relays are commonly used in the control of industrial automation processes.High frequency (RF) relays are one type of relay that specializes in the switch and control of high frequency signals. The G6Z-1FE-A DC9 type relay is a low-loss, latching, high frequency (RF) relay that features half-inch spacing and up to 4A capacity. This type of relay is ideally suited for applications such as telecommunications, radio frequency (RF) switching, and high speed data acquisition.

G6Z-1FE-A DC9 Application Field and Working Principle

The G6Z-1FE-A DC9 is typically found in applications that involve the control and/or switching of high frequency signals. This type of relay is highly suitable for applications that require fast switching speeds and/or the isolation of high frequency signals. Some common applications for the G6Z-1FE-A DC9 include:

• Telecommunication equipment
• Radio frequency (RF) switches
• High speed data acquisition

The G6Z-1FE-A DC9 relay works by being energized with a control signal that causes the contact to close and then remain closed until the control signal is removed. The G6Z-1FE-A DC9 relay is designed to handle up to 4A of current and is capable of switching up to 20MHz in high frequency signals and up to 50MHz in low frequency signals. The relay is also fully qualified under MIL-M-38510/230 and is RoHS compliant.

Relay Signaling Methods

The G6Z-1FE-A DC9 high frequency (RF) relay uses two different signaling methods for communication. The first signaling method is referred to as direct voltage control and involves the relay being actuated by a voltage being applied or removed from its control signal input. The second signaling method is referred to as current control and involves the control signal being energized or de-energized by supplying or removing the current to the relay.

Installation and Wiring of G6Z-1FE-A DC9

The G6Z-1FE-A DC9 is a low profile PCB-mountable relay that requires minimal wiring for installation. The relay is supplied with a 6-pin header and cage connector and can be easily inserted onto a standard circuit board. The cage connector also makes it easy to connect the leads of the relay to the appropriate circuit connections.For the best performance, the G6Z-1FE-A DC9 should be installed in an area that is free from dust, moisture, heat, and other electrical interference. It is also important to ensure that the wiring and connections between the relay and the circuit board are properly insulated and secure to avoid any short-circuits.

Conclusion

The G6Z-1FE-A DC9 is a latching, low-loss, high frequency (RF) relay that is suitable for use in a wide range of applications, including telecommunications, radio frequency (RF) switching, and high-speed data acquisition. This type of relay works by using either direct voltage control or current control to close and remain closed until the control signal is removed. The G6Z-1FE-A DC9 is also RoHS compliant and is supplied with a 6-pin header and cage connector for easy installation.

The specific data is subject to PDF, and the above content is for reference