G6Z-1PE-A DC24

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

High frequency (RF) relays are electronic switches designed to route a specific radio frequency (RF) signal without adding noise, attenuation or additional signal loss. The G6Z-1PE-A DC24 is a high frequency (RF) relay with a DC control voltage that is used to switch a signal from one circuit to another.

The specs of the G6Z-1PE-A DC24 are typical of a high frequency (RF) relay, with an operating frequency range of 0.15MHz-2.2MHz (depending on the model) and an insertion loss of less than 0.3dB. It is a latching type relay, meaning that the relay is activated when a control voltage is applied, and will remain activated until the control voltage is removed. The relay can be designed to handle a maximum power of 10 milliwatts,¹ and can handle up to 30VDC between the switching contacts. It is an SPDT (Single Pole Double Throw) type relay, meaning that the signal can be routed to either of two outputs.

The G6Z-1PE-A DC24 is typically used in a wide variety of applications, such as radio broadcast and television station receivers, satellite and cable television receivers, microwave receivers, and any other applications that require the switching of signals between circuits. It can also be used in RF switches, antenna switching, or in any application where the switching of an RF signal is required.

The working principle of the G6Z-1PE-A DC24 is simple. When the control voltage is applied, the relay is activated (or "closed"), and the signal is routed through the switched contact. When the control voltage is removed, the relay is deactivated (or "open"), and the signal is routed through the alternative path. The amount of voltage needed to activate the relay depends on the model chosen, but usually ranges between 12VDC and 24VDC.

The G6Z-1PE-A DC24 is an ideal choice for applications that require the reliable switching of signals between circuits. It provides a low insertion loss, requires only a small control voltage, and can handle up to 10 milliwatts of power. In addition, it is a latching type relay, meaning that the switched signal will remain in the desired path until the control voltage is removed.

¹The G6Z-1PE-A-24DC can handle up to 10 mW of power. Higher power capable models are available.

The specific data is subject to PDF, and the above content is for reference