GBPC25005-E4/51

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers are components used in many applications that require power conversion from alternating current (AC) to direct current (DC). The GBPC25005-E4/51 is a type of bridge rectifier that offers a range of benefits in its application fields, as well as a unique working principle.

The GBPC25005-E4/51 is an Epoxy Terminated, Double Rectified, Single Phase, Aluminum case, Power Diode Bridge. It has an economical minimum quantity of 25 pieces and a 5 Amp current rating at 50 Volts per Element, with a total of 25 Amps for the entire bridge. It is designed for high reliability and long term performance, with a maximum repetitive reverse voltage of 250 Volts and a forward surge current rating of 30 Amps. It operates from a temperature range of -40°C to 150°C.

The primary application fields of the GBPC25005-E4/51 are rectification and voltage regulation, such as in power supplies and lighting inductive applications. Additionally, this bridge is commonly utilized in AC/DC conversions, battery chargers, and signal rectifications in televisions and other electronics. Power tools and motors may also benefit from its usage.

Typically, single phase bridge rectifiers are composed of an AC source, bridge network, and a load. When a single phase AC source is directly connected to the bridge network, the output voltage and frequency remain the same at the other side of the bridge. The bridge network consists of four diodes which form a bridge and create two pathways for forward current and two pathways for reverse current. This allows for efficient current and voltage regulation. In the case of the GBPC25005-E4/51, the four diodes are connected to form a bridge that has a voltage rating of 250A.

The working principle of the GBPC25005-E4/51 is based on the fully rectified waveform. When an AC source is connected to its terminals, the voltage waveform is divided into two parts. The first part of the waveform is rectified through a positive half-cycle, where the diode allows current to flow in a single direction only. Then, the second part of the waveform is rectified through a negative half-cycle, where the diode allows current to flow in the opposite direction only.

The rectified waveform is a continuous output that is equal to its maximum forward voltage, and is completely free of distortion. This allows for more efficient energy conversion and reduced energy loss. Additionally, the low-voltage drop of the GBPC25005-E4/51 eliminates the need for additional voltage regulation components such as voltage regulators and filters. This increases the overall efficiency of the system.

The GBPC25005-E4/51 bridge rectifier is an efficient and reliable device with a range of application fields and a unique working principle. It is perfectly suited for rectification and voltage regulation in power supplies and lighting inductive applications, as well as AC/DC conversions, battery chargers, and signal rectifications in televisions and other electronics. With its low-voltage drop, high current rating, and wide temperature range, the GBPC25005-E4/51 is an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference