GDC-125MA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses are an important part of electrical installations as they are designed to protect equipment and wiring from over-current and over-voltage conditions. The GDC-125MA is one type of a fuse in the cartridge style range. This type of fuse is designed for use with Current sensing electronic circuits which measure and control the current level in an installation.

The GDC-125MA is designed to be used in a range of current sensing applications. These applications include, but are not limited to, lighting circuits, motors, rectifier circuits and other regulated power systems. It is also suitable for use with electron beam welders, AC or DC voltage monitors, and other sensitive electronics. The GDC-125MA can also be installed in ATE test systems to provide protection for sensitive components during development and production.

The GDC-125MA is a single-piece, easy to mount fuse. It is made of polyolefin with excellent physical characteristics, good chemical resistance and arc suppression. The fuse has two legs, one fitted with an internal contact and the other with a 4mm spade terminal. These terminals are connected together by an aluminium foil bridge that acts as a current limiting fuse element. The fuse is rated for both 15 and 30 A current ratings, which is marked on the fuse in an easy to read format.

The GDC-125MA operates in a current sensitive mode, meaning it will open the circuit in the event of an overload condition. This helps protect circuits in the case of a component failure or wiring fault. In the event of an overload, the current will cause the foil bridge inside the fuse to heat up. This heat causes a thermal runaway effect causing the bridge to vaporise and open the circuit. Once the overload is removed, the fuse will reset and the circuit will resume operation.

The GDC-125MA is a reliable and cost effective protection solution for current sensing applications. It offers high quality, long term performance, designed for use in a variety of environments. The fuse is also RoHS compliant and safety certified to ensure safe operation in any application.

In summary, the GDC-125MA fuse is a reliable and cost effective solution for current sensing applications. It combines good physical characteristics, easy mounting, high current ratings and safe operation in various environments. As such, it is a highly recommended safety precaution for any electrical installations or equipment requiring reliable current protection.

The specific data is subject to PDF, and the above content is for reference