GL10-R3711

Series:	G10
Part Status:	Active
Sensing Method:	Retroreflective
Sensing Distance:	3.150" ~ 590.551" (80mm ~ 15m)
Voltage - Supply:	24 V ~ 240 V
Response Time:	10ms
Output Configuration:	Relay - Dark-ON/Light-ON
Connection Method:	Cable
Ingress Protection:	IP67
Cable Length:	78.740" (2000.00mm)
Light Source:	Red (625nm)
Adjustment Type:	--
Operating Temperature:	-30°C ~ 60°C (TA)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

GL10-R3711 optical sensors represent a range of industrial and photoelectric sensors that are widely used in industrial automation applications. It include servo-controlled lenses, IR emitters, light-sensing tubes, LEDs, and other components. These sensors are capable of detecting and responding to a variety of environmental conditions, such as temperature, light, sound, pressure, and humidity. This article will be discussing the application field and working principle of GL10-R3711 optical sensors.

Application Field

GL10-R3711 optical sensors are widely used in a variety of industries, including automotive, manufacturing, medical, and aerospace engineering. These sensors are highly reliable and provide accurate and reliable results. In the automotive industry, they are used for safety purposes. For example, the sensors are used to detect dangerous levels of heat and smoke, or to detect objects that may be hazardous to the passengers. They are also used to monitor the temperature in the engine compartment and other areas.In the manufacturing and automation industries, such sensors are used to detect material presence and detect motion. They are also used to detect and track inventories and production lines. In medical field, they are used to monitor patient vital signs, to detect signs of infection, or to monitor radiation levels. They are also used in the aerospace industry to detect and identify objects and movements.

Working Principle

GL10-R3711 optical sensor\'s working principle is based on the emission and detection of light. By using an optical filter, the sensor can detect intensity of a light source and can differentiate between visible or infrared light. When the sensor receives a signal, an internal amplifier amplifies the signal and converts it into an analog output. The sensor is also capable of sensing a wide range of environmental variables, such as temperature, humidity, pressure, etc.The working principle is the same for all optical sensors and essentially consists of three components. The first component is an emitter, which emits a light beam. The second component is the sensor, which receives the light beam and then converts it into an electrical signal. The third component is the amplifier, which further amplifies the signal for better accuracy.

Conclusion

GL10-R3711 optical sensors are widely used in industries, such as automotive, manufacturing, medical, and aerospace engineering. The working principle behind these sensors is based on the emission and detection of light. They use an optical filter to detect intensity of a light source, with an internal amplifier amplifying the signal and converting it into an analog output. These sensors are not only highly reliable, but they also offer accurate and reliable results.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description