Allicdata Part #: | GMD-1.5A-ND |
Manufacturer Part#: |
GMD-1.5A |
Price: | $ 0.00 |
Product Category: | Circuit Protection |
Manufacturer: | Eaton |
Short Description: | UL TIME DELAY 5MM GLASS FUSE 1.5 |
More Detail: | N/A |
DataSheet: | GMD-1.5A Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | GMD |
Packaging: | -- |
Part Status: | Obsolete |
Fuse Type: | Cartridge, Glass |
Current Rating: | 1.25A |
Voltage Rating - AC: | 250V |
Response Time: | Slow |
Package / Case: | 5mm x 20mm |
Mounting Type: | Holder |
Breaking Capacity @ Rated Voltage: | 100A |
Melting I²t: | 25 |
Approvals: | CSA, UL |
Operating Temperature: | -- |
Color: | -- |
Size / Dimension: | 0.205" Dia x 0.787" L (5.20mm x 20.00mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Fuses
GMD-1.5A is an overcurrent protection device, also known as a fuse, to protect circuits and electrical systems from damage due to overcurrent. It is designed to quickly detect any electrical fault, such as short circuit or overload, and disconnect the circuit or system from the power source to prevent further damage. The GMD-1.5A is used in a variety of applications, ranging from home electrical systems to industrial environments.
In order to properly protect the circuit or system, the GMD-1.5A must be of the correct size and type for the application. The size of a fuse is usually determined by the amount of current (in amps) that it is designed to protect. The type of fuse is determined by its time-current rating (TCR), which indicates how quickly the fuse will disconnect the circuit when a fault occurs. For example, a fast-acting fuse will disconnect the circuit within milliseconds, while a slow blow fuse will take longer, depending on the amount of current that flows through it.
The GMD-1.5A fuse is designed to be used in circuits with a maximum current rating of up to 1.5A. It is a fast-acting type fuse, meaning that it will disconnect the circuit within milliseconds of detecting an overcurrent or short circuit. This makes it ideal for protecting electronic circuits, since it will not allow an excessive amount of current to flow through the circuit and cause damage. In addition, the GMD-1.5A is designed to be installed quickly and easily, requiring only a simple screwdriver and some basic wiring knowledge.
The GMD-1.5A is designed to operate in a variety of environments, including high temperatures, moisture, and vibration. It is also shock-resistant, meaning that it can withstand most accidental impacts without damage. In addition, the GMD-1.5A is deemed safe for use in UL-listed industrial control panels, meaning that it has been tested and approved for use in such applications.
The GMD-1.5A is a reliable, efficient, and cost-effective overcurrent protection device for a variety of applications. When properly sized and installed, the GMD-1.5A allows the circuit or system to be protected from overcurrents or short circuits, helping to ensure that it operates safely and efficiently. In addition, it is easy to install and is built to withstand most typical environmental conditions.
The specific data is subject to PDF, and the above content is for reference
FUSE BRD MNT 1.6A 125VAC/VDC SMD
FUSE BOARD MNT 3.15A 125VAC/VDC
FUSE BOARD MNT 350MA 125VAC/VDC
FUSE BRD MNT 2.5A 125VAC/VDC SMD
FUSE BRD MNT 1.6A 125VAC/VDC SMD
FUSE BOARD MNT 1A 250VAC RADIAL