GRTE18-N1142

Series:	GR18
Part Status:	Active
Sensing Method:	Proximity
Sensing Distance:	0.197" ~ 21.654" (5mm ~ 550mm)
Voltage - Supply:	10 V ~ 30 V
Response Time:	1ms
Output Configuration:	NPN
Connection Method:	Cable
Ingress Protection:	IP67
Cable Length:	78.740" (2000.00mm)
Light Source:	Red (650nm)
Adjustment Type:	Adjustable, Potentiometer
Operating Temperature:	-25°C ~ 55°C (TA)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to GRTE18-N1142.

GRTE18-N1142 is an optical sensor that falls under the category of photoelectric, industrial sensors. It uses photoelectric switches to detect the presence of an object, by sending out a beam of infrared light (IR) from an LED transmitter. This beam is emitted from the transmitter and is then intercepted by a receiver when an object is present. In addition to photoelectric sensors, industrial sensors such as those from GRTE18-N1142 are used in a variety of applications, such as in automation applications, presence detection, and position sensing.

Application Field of GRTE18-N1142

The GRTE18-N1142 can be used in many different applications, ranging from industry to consumer use. In industry, the GRTE18-N1142 is often used for safety applications, where it can detect the presence of an object and trigger an alarm or shut down a machine in order to prevent accidents. The GRTE18-N1142 is also useful in detection and indicator systems, as the receiver is able to see the LED signal and react to it accordingly. In consumer electronics, the GRTE18-N1142 can be used as a motion sensor or proximity detector, allowing for devices such as smartphones to turn on or off based on the presence of an object.A key factor in the effectiveness of the GRTE18-N1142 is the tuning of the illumination angle. Through this tuning, the sensor is able to detect objects within a specific range and react as needed. This tuning must be done precisely for each application to make sure the sensor can detect objects as quickly and accurately as possible.

Working Principle of GRTE18-N1142

The GRTE18-N1142 works by using optical transceiver technology to detect the presence of an object. The transceiver consists of a LED transmitter and a receiver, which are both connected to the device itself.When an object is present, a beam of infrared light (IR) is emitted from the LED transmitter. When the beam is intercepted by a receiver, it triggers an electrical signal which is then read by the device, triggering a reaction. The transceiver technology used by the GRTE18-N1142 allows for a fast detection speed, accurate results, and a long detection range of up to 1000 mm. [Depending on the application]The GRTE18-N1142 also has an adjustable optical head, which allows the user to change the angular opening of the LED transmitter. This makes it possible to adjust the detection range to suit a specific application. This is especially useful for applications involving the detection of small objects.

Conclusion

The GRTE18-N1142 is a type of industrial photoelectric sensor that uses optical transceiver technology to detect the presence of an object. This sensor is used in a variety of applications, ranging from safety to consumer electronics, and can detect objects from up to 1000 mm away. It also has an adjustable optical head, allowing users to alter the detection range to best suit the application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description