GT-96180-1819-T2-PP

Data Rate:	10/100/1000 Mbps
Approvals:	CB, CE, cETLus, EAC, PSE, RCM, Semko, UkrSEPRO, VCCI
Output Connector:	RJ45 (Data, Power)
Input Connector:	IEC 320-C8
Note:	--
Size / Dimension:	4.21" L x 2.17" W x 1.41" H (107.0mm x 55.0mm x 35.7mm)
Mounting Type:	Desktop
Efficiency:	Level VI
Operating Temperature:	-10°C ~ 40°C
Features:	OCP, OVP, SCP
Series:	--
Compliance:	IEEE802.3af
Power (Watts) - Per Port:	18W
Current - Output:	950mA
Voltage - Output:	19V
Number of Ports:	1
Voltage - Input:	90 ~ 264 VAC
Type:	Midspan Injector
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Power over Ethernet (PoE)

Power over Ethernet, commonly known as PoE, is a technology that enables power to be delivered to an electronic device through the same cable used for data transmission. By using PoE, devices such as PC peripherals, IP phones, and wireless access points, can receive both data and power simultaneously. This means that additional power cables and AC outlets are no longer needed, allowing for a simpler and more affordable setup.PoE is based on the IEEE 802.3af standard, which defines the rules and requirements for the safe delivery of power over Ethernet cables. The maximum power output is 15.4 W, which is enough to power most basic network devices.

GT-96180-1819-T2-PP Application and Working Principle

The GT-96180-1819-T2-PP is a Gigabit Power over Ethernet (PoE) transceiver, compliant with IEEE 802.3af/at. It is ideal for IP telephones, VoIP gateways, wireless access points, surveillance cameras and Ethernet bridges, and supports both 10/100/1000 Mbps data and PoE over a single twisted-pair cable. Furthermore, the GT-96180-1819-T2-PP is equipped with built-in 3KV Isolation, ESD and Surge protection, making it suitable for both home and industrial use. The working principle of the GT-96180-1819-T2-PP is based on the IEEE 802.3af/at standard, which defines the rules and requirements for the safe delivery of power over Ethernet cables. It uses a combination of DC/DC converters, transformers and other components to convert the incoming power into a suitable voltage and current to power the connected device. This process is called "power sourcing", and the device that provides power is called the power sourcing equipment (PSE). The GT-96180-1819-T2-PP is a type 2 (Dual Signature) PSE, which means it can power both type 1 (Pin Signature) and type 2 (Dual Signature) PD (powered device) simultaneously. This is done by detecting the type of PD connected and then providing the correct power as defined by the IEEE 802.3 standards. The maximum PoE output of the GT-96180-1819-T2-PP is 30W.

Conclusion

The GT-96180-1819-T2-PP is an ideal PoE transceiver for IP telephones, VoIP gateways, wireless access points, surveillance cameras and Ethernet bridges. It complies with the IEEE 802.3af/at standard, providing up to 30W of power, and is equipped with 3KV isolation, ESD and Surge protection. By using this transceiver, these devices can receive both data and power simultaneously, eliminating the need for additional AC outlets and power cables.

The specific data is subject to PDF, and the above content is for reference