H25D-SS-1000-ABC-28V/V-ECS18

Series:	H25
Part Status:	Active
Encoder Type:	Optical
Output Type:	Quadrature (Incremental)
Pulses per Revolution:	1000
Voltage - Supply:	5 V ~ 28 V
Actuator Type:	Shaft
Detent:	No
Built in Switch:	No
Mounting Type:	Chassis Mount
Orientation:	User Selectable
Termination Style:	Cable
Rotational Life (Cycles Min):	10B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Encoders - H25D-SS-1000-ABC-28V/V-ECS18 Application Field and Working Principle

Encoders are used to sense movement or rotational angle and to convert it into an electrical signal. Encoders are used in a variety of applications where precise control is required, such as robotics, industrial machines, and medical devices. The H25D-SS-1000-ABC-28V/V-ECS18 encoder is a type of encoder that can be used in various applications. This article will provide an overview of the H25D-SS-1000-ABC-28V/V-ECS18 encoder’s application field and working principle.The H25D-SS-1000-ABC-28V/V-ECS18 encoder is a rotary angle encoder. It is a type of incremental rotary encoder that produces a pulse output when the shaft is rotated. The encoder has a maximum shaft rotation speed of 1000 rev/min and a maximum rotational angle of 1,800 deg/sec. This encoder is designed for industrial applications, including high-end machinery and robotics, as well as for medical devices. The H25D-SS-1000-ABC-28V/V-ECS18 encoder is a self-contained unit which consists of a shaft connected to a cable with a connector. It has an outer casing that encloses the internal componentry. The casing is designed to be durable and has an IP protection level rating of 67, meaning it is protected against dust and water. The H25D-SS-1000-ABC-28V/V-ECS18 encoder is a bipolar device, meaning it produces electrical signals of positive and negative polarity when the shaft is rotated. The output signals are square waves with positive and negative polarities. The encoder can be connected to external electronics via the connector on the cable. The working principle of the H25D-SS-1000-ABC-28V/V-ECS18 encoder is based on the sensing of shaft rotation via the internal componentry. The encoder uses two sensing components, a detector wheel and a Hall effect sensor. When the shaft is rotated, the detector wheel turns and the Hall effect sensor detects the rotational direction. The Hall effect sensor sends an alternating current (AC) signal to the internal circuitry which triggers the electronics. This triggers the internal digital logic to output a square wave signal when the shaft is rotated. The output of this encoder is a pulse signal, with one pulse for each shaft rotation. The output signal is used to calculate the rotational angle of the shaft. With a single pulse, the rotational angle is calculated by dividing it by the shaft rotation speed. For example, if the shaft is rotating at 1000 rev/min, the output of one pulse will represent 1/1000th of a rotation. The output signal can also be used to measure the angular velocity of the shaft.The H25D-SS-1000-ABC-28V/V-ECS18 encoder can be used in a variety of applications where precise control is required. It can be used in factory automation systems, robotics, and medical devices. It can also be used to measure the rotational angle of motors, valves, and pumps. In conclusion, the H25D-SS-1000-ABC-28V/V-ECS18 encoder is a rotary incremental encoder that can be used in a variety of applications. This encoder produces a pulse signal when the shaft is rotated, and this signal can be used to calculate the rotational angle and the angular velocity of the shaft. This encoder is durable and has an IP67 rating, making it suitable for a wide range of industrial and medical applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description