H4100RDZA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are indispensable components of circuits and are as common in high precision electronics as they are in low current applications. One common type of through hole resistor is the H4100RDZA, which is a resistor designed for high precision signal level measurements. The H4100RDZA is an unshielded wire wound resistor with a single resistance element which is wound onto an insulated carrier.

Application Field and Working Principle

The main application for the H4100RDZA lies in its ability to measure and regulate high precision signal levels. While it can be used in any circuit, it excels in precision signal measurements where precise adjustment of the resistance value is required. Its working principle is based on the principle of Ohm\'s law, where the amount of heat produced by current going through a resistor is proportional to the power of the current and the resistance value.

The H4100RDZA is designed to provide a very precise and stable resistance value in a variety of circuit conditions. It is constructed from an insulated carrier with a single wire wound element. The wire wound element consists of a continuous wire of uniform cross section insulated with a Teflon or Mu-metal coating. The carrier is then filled with an insulating paste or powder to minimize parasitic and heat effects.

The resistance is fixed and can be adjusted to the required precision by varying the length of the coil. This means that the resistance level can be accurately adjusted to a specific range depending on the application. This characteristic of the H4100RDZA makes it suitable for use in high precision audio and video signal measurements, where the precise adjustment of audio or video levels is essential.

In addition to precision signal measurements, the H4100RDZA is also suitable for use in low power electronic devices, such as calculators and oscilloscopes. The H4100RDZA has a wide resistance range which is usually between 0.1Ω and 100KΩ, and can be used to accurately control the current flow in a range of circuits. The resistor can be used in conjunction with other components to create a voltage divider, where the output voltage is dependent on the resistor value. This can be used in applications such as timer circuits or gate circuits.

The H4100RDZA is an ideal choice for precise signal measurements or low power electronic devices. It is designed to provide a high level of precision and accuracy while still being extremely reliable. It is also relatively easy to use and does not require special equipment for adjustment. As a result, it is a popular choice for many applications and is used widely in industrial, medical, and consumer electronics.

The specific data is subject to PDF, and the above content is for reference