H415R8BDA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are a common type of resistor found in most electronics. The H415R8BDA resistor is a general-purpose through hole resistor designed for use in a wide variety of electronics applications. The resistor offers two basic advantages over other resistor types – the ability to be mounted directly onto a printed circuit board and the ability to handle unusually high power dissipation.

The H415R8BDA is a thick-film resistor, a type of resistor that uses a mixture of ceramic and metal particles and a resistive paste that is screen-printed onto a ceramic substrate. The ceramic substrate is then heated to cure the resistive paste and bond the components to the substrate. This construction gives the H415R8BDA its robust construction and long life expectancy, which is up to 25,000 hours in test conditions, and up to 10,000 hours in dynamic use environments.

The H415R8BDA through hole resistor is designed to handle a wide range of current and voltage ratings, with a maximum power dissipation of 5 W and an operating temperature range of -55°C to +105°C. The resistor is UL approved for safety, and it has a flame retardant rating of UL 758. The resistor has a resistor value tolerance of 5% and a breakdown voltage of 200V.

The H415R8BDA through hole resistor is well-suited for a variety of different applications, including power supplies, alarms, computers, LED drivers, automotive, and HVAC systems. It can be used in wave soldering processes or mounted directly onto a PCB using screws, clips, and terminals. Because it is a through hole component, it can be used with virtually any type of PCB design and does not require the use of special circuit boards or components. Additionally, the resistor is designed to handle higher current and voltage ratings than traditional thin-film resistors, allowing it to be used in applications requiring higher power dissipation.

The H415R8BDA\'s working principle is fairly straightforward. When a current is applied to the resistor, the resistive paste allows only a certain amount of current to pass through, thereby limiting the amount of power that can flow to other components. This effect is based on Ohm\'s Law, which is a formula that describes the relationship between voltage, current, and resistance. The formula states that the amount of current that can flow through a resistor is proportional to the voltage applied across it and inversely proportional to the resistance.

In summary, the H415R8BDA is a through-hole resistor designed for use in a wide range of applications, including power supplies, alarms, computers, LED drivers, automotive, and HVAC systems. It has a resistor value tolerance of 5% and a breakdown voltage of 200V, as well as a maximum power dissipation of 5W and an operating temperature range of -55°C to +105°C. Its working principle is based on Ohm\'s Law, and it can be mounted directly onto a PCB using screws, clips, and terminals.

The specific data is subject to PDF, and the above content is for reference