H416R2BCA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through-hole resistors are a type of resistor typically found in electronic equipment. The H416R2BCA is a through-hole, metal film resistor. It has a power rating of 2 watts and a resistance range of 0.1 ohm to 10 megohm. It is designed to suit a range of applications, such as low-noise audio equipment and low-level signal measurement.

A through-hole resistor is essentially a long metal rod, usually made of metal, ceramic, or ceramic-encased wire. It is designed to restrict electrical current. It works by reducing the amount of current that can pass through it. In simpler terms, it is like a faucet. When you turn the faucet on, the water\'s flow is restricted; when you do the same to the H416R2BCA, the electrical current flow is also restricted.

The H416R2BCA is designed to operate in a variety of conditions. It is tolerant of temperature range of -55°C to +125°C. It has a wide operating voltage rating of 4.0V-10.0V and a continuous current rating of 200mA. It also features a low noise level of 0.3dB and a long-term stability of 0.05%/1000h. All these features make the part ideally suited for low-noise audio systems and other systems that require low-level signal measurements.

The H416R2BCA is composed of four main components: a carbon film, a metal resistor, a ceramic cap layer, and a protective sleeve. The carbon film acts as the resistive element and is responsible for the resistance measurement. As the voltage across the resistor increases, the resistance also goes up. This allows the resistor to be adjustable via voltage. The metal resistor is responsible for providing basic protection against shorting and for heat dissipation during operation. It is composed of a metal alloy such as nickel-iron and is responsible for providing the required low noise level.

The ceramic cap layer provides mechanical support. It also helps ensure that the temperature of the resistor remains stable. Finally, the protective sleeve provides insulation and protects the resistor from dust and other contaminants. All these components work together to ensure that the H416R2BCA operates as intended in its various applications.

The H416R2BCA is commonly used in many applications that require accurate signals at very low frequencies, such as medical imaging, research, etc. As a through-hole resistor, it is reliable and provides reliable performance. It is also easy to install and operates within a wide range of environmental conditions. This makes it a great choice for any application where extremely precise signals are required.

The specific data is subject to PDF, and the above content is for reference